Delete Face
With Delete Face tool, you can do the following:
-
Delete. Deletes a face from a surface body, or deletes one or more faces from a solid body to create surfaces.
-
Delete and Patch. Deletes a face from a surface body or solid body and automatically patches and trims the body.
-
Delete and Fill. Deletes faces and generates a single face to close any gap.
To delete faces from a surface body:
-
Click Delete Face on the Surfaces toolbar, or Insert, Face, Delete.
The Delete Face PropertyManager appears.
-
In the graphics area, click the faces you want to delete.
The names of the faces appear under Faces to delete .
-
Under Options, click Delete.
-
Click OK .
The faces disappear.
|
|
Select gray faces to delete
|
Faces deleted
|
To delete and patch faces on a surface body:
-
Follow steps 1 and 2 from the previous procedure.
-
Under Options, click Delete and Patch.
-
Click OK .
The faces disappear, and the adjoining faces extend to form an unbroken surface.
|
|
Select gray faces to delete
|
Blue faces patched
|
To delete and fill surfaces:
-
Follow steps 1 and 2 from the previous procedure.
-
Under Options, click Delete and Fill.
The system deletes the faces and replaces them with a single face
-
Click OK .
The faces are deleted, and are filled by a single unbroken surface.
|
|
Before Delete and Fill
|
After Delete and Fill
|
To delete faces from a solid body and create surfaces:
-
Using a solid body, click Delete Face on the Surfaces toolbar, or Insert, Face, Delete.
The Delete Face PropertyManager appears.
|
|
-
In the graphics area, click the faces you want to delete.
The names of the faces appear under Faces to delete .
-
Under Options, click Delete.
|
|
-
Click OK .
The faces disappear, and a new DeleteFace1 surface body is added to the Surface Bodies folder in the FeatureManager design tree.
|
|