Hide Table of Contents

Caustics

Caustic effects are the result of indirect illumination. Light is emitted from a light source, goes through one or more specular reflections or transmissions, hits a diffuse object, and reflects to the viewer. You can enable caustic effects independent of indirect illumination effects.

For example, consider light patterns on the bottom of a swimming pool. Light is emitted from a light source, the sun. The light goes through one or more specular transmissions as it passes through the water. The light hits a diffuse object, the bottom of the pool. Finally, the viewer sees the caustic effects on the bottom of the pool.

For caustic effects to appear:

  • Enable caustic must be selected on the Illumination tab in the Options dialog box.

  • Clear All appearances cast and receive caustics by default on the Illumination tab to control Caustics Cast and Caustics Receive for each appearance. If selected, you cannot control the effects on individual appearances.

    • One or more specular appearances must be set to cast caustic photons.

    • One or more diffuse appearances must be set to receive caustic photons.

  • A light source must emit caustic photons. Directional, point, and spot lights can emit caustic photons.

To render an image with caustic effects:

  1. Select Enable caustic on the Illumination tab of the Options dialog box.

  2. Select Caustics Cast on the Illumination tab of the Appearances PropertyManager for one or more specular appearances.

  3. Select Caustics Receive on the Illumination tab of the Appearance PropertyManager for one or more diffuse appearances.

 

  1. Enable a directional, point, or spot light to emit caustic photons. On the PhotoWorks properties PropertyManager for a light:

    1. Set Energy to determine the total amount of radiated energy from the light.

    2. Set C photons to adjust the number of photons emitted by the light. Higher values produce better results but images take longer to render.

  2. Render the image.

Consider a brass ring on a table top. The brass ring is set to cast photons and the table top is set to receive photons. A spot light illuminates the scene and casts C photons. Notice the dots on the image rendered with caustics. The dots are the photons cast by the spot light, then reflected off the specular brass ring and displayed on the diffuse table top.

Without caustics

With caustics

For more realistic images, increase the number of photons so the photons blend together into a smooth pattern rather than multiple dots with distinctive edges.

Back to Illumination Options.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Caustics
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:




x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2010 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.