Area Hatch/Fill PropertyManager
Specify the following properties when you edit
an area hatch or fill pattern in a drawing.
Properties
Hatch. Applies a hatch pattern
to the region. When selected, you can set the Hatch
Pattern, Hatch Pattern Scale 
, and Hatch Pattern Angle
.
Solid. Applies a black fill
to the region.
To change the fill color, select the fill
in the graphics area and click Line Color 
on the
Line Format toolbar. You cannot change the color of an area hatch in a
section view.
None. Removes the area hatch
or fill from the region.
Material crosshatch (available
for section views and aligned section views). Uses the pattern,
scale, and angle for the material specified in the part document.
Apply to (available for section
views and aligned section views).
Component.
Applies the area hatch or fill to the currently selected component only.
Region.
Applies the area hatch or fill to the currently selected surface only.
View.
Applies the area hatch or fill to all instances in the currently active
section view.
Body.
Applies the area hatch or fill to selected bodies.
Layer 
Applies the area hatch or fill to the specified drawing layer.
Options
Apply changes immediately. Updates the drawing view immediately
with your changes in the PropertyManager.
Apply (available when Apply changes immediately is cleared).
Updates the drawing view when you want to improve performance time.