Hide Table of Contents

Display and Selection Options

Specify options for the display and selection of edges, planes, and so on.

To set display and selection options:

  1. Click Options  or Tools, Options.

  2. Select Display/Selection.

  3. Select from the options described below, then click OK.

Reset All returns all system options, not only those on the active page, to the system defaults.

Hidden edges displayed as

Solid or Dashed. Specify how hidden edges are displayed in Hidden Lines Visible mode in part and assembly documents.

Selection of hidden edges

  • Allow selection in wireframe and HLV modes. Allows you to select hidden edges or vertices in Wireframe and Hidden Lines Visible modes.

  • Allow selection in HLR and shaded modes. Allows you to select hidden edges or vertices in Hidden Lines Removed, Shaded With Edges, and Shaded modes.

Part/Assembly tangent edge display

Controls how tangent edges are displayed when the model is in Hidden Lines Removed, Hidden Lines Visible, or Shaded With Edges mode.

  • As visible.

  • As phantom.

  • Removed.

You can also click View, Display, and select Tangent Edges Visible, Tangent Edges as Phantom, or Tangent Edges Removed.

Edge display in shaded with edges mode

  • HLR. Any edges that would appear in Hidden Lines Removed mode are displayed in Shaded With Edges mode also.

  • Wireframe. All edges are shown in Shaded With Edges mode (like Wireframe).

Assembly transparency for in context edit

Controls the transparency options when you edit assembly components. These settings affect only the components that are not being edited. (This option is not available when Large Assembly Mode is on.)

  • Opaque assembly. Components not being edited are opaque.

  • Maintain assembly transparency. Components not being edited retain their individual transparency settings.

  • Force assembly transparency. Components not being edited use the transparency level you set here. Move the slider to the desired transparency level (to the right is more transparent).

You can also change the colors used in Edit Component mode.

Highlight all edges of features selected in graphics view. All edges of a feature are highlighted when you select the feature.

Dynamic highlight from graphics view. Model faces, edges, and vertices are highlighted when you move the pointer over a sketch, model, or drawing. (This option is not available when Large Assembly Mode is on.)

Show open edges of surfaces in different color. Makes it easier to differentiate between the open edges of a surface and any tangent edges or silhouette edges.

To specify the edge color, click Tools, Options, System Options, Colors. Select Surfaces, Open Edges in System colors.

Anti-alias edges/sketches. Smooths out jagged edges in Shaded With Edges, Wireframe, Hidden Lines Removed, and Hidden Lines Visible modes. (This option is not available when Large Assembly Mode is on.)  

Display shaded planes. Displays transparent shaded planes with a wireframe edge that have different front and back colors.

To specify the shaded plane colors, click Tools, Options, Document Properties, Plane Display. Under Faces, select Front Face Color or Back Face Color to change the colors. Use the slider to adjust the transparency level (to the right is more transparent).

Enable selection through transparency. When selected, you can select opaque objects behind transparent objects in the graphics area. When cleared, you can select the nearest object regardless of transparency. Press Shift when you select objects to temporarily override the option.

Display reference triad. Displays a reference triad to help orient you when viewing models. The reference triad is for display purposes only; you cannot select it or use it as an inference point.

Display scrollbars in graphics view. This option is unavailable when a document is open. To change this setting, you must close all documents.

Display dimensions flat to screen. Select to display dimension text in the plane of your computer screen. Clear to display dimension text in the plane of the dimension's 3D annotation view.  

Display Notes flat to screen. Select to display notes in the plane of your computer screen. Clear to display notes in the plane of the dimension's 3D annotation view.

Projection type for four view viewport. Controls which views are displayed in the viewports when you click Four View (Standard Views toolbar).

  • First Angle. Front, Left, Top, and Trimetric.

  • Third Angle. Front, Right, Top, and Trimetric.

 



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Display and Selection Options
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2010 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.