Cutting, Copying,
and Pasting in Sketches
Cutting, Copying, and Pasting Sketch Entities
You can cut and paste, or copy and paste, one or more sketch entities
from one sketch to another or within the same sketch.
With any sketch entity in an
open sketch, you can:
To copy one or more sketch entities, select the entities,
then click Edit, Copy,
or press Ctrl+C. Click in the
graphics area, then click Edit,
Paste or press Ctrl+V.
The center of the sketch entities is placed where you clicked.
Move a
sketch entity within the same sketch. Hold down Shift
while dragging the sketch entity.
Move a
sketch entity between different documents (the second document must have
an open sketch). Hold down Ctrl and
drag the sketch entity into the second document. Release Ctrl,
hold down Shift, and drop the
sketch entity.
Copying and Pasting Entire Sketches
You can copy an entire sketch and paste it on a face in the current
part, or you can paste it into a different sketch, or into a part, assembly,
or drawing document. The target document must be open.
When you copy
an entire sketch using the Copy
Entities tool (Sketch toolbar), you can specify
to copy the relations.
To copy and paste a sketch:
Select the closed sketch in the FeatureManager
design tree.
Click Edit,
Copy, or press Ctrl+C.
Click in the sketch or document where you want
to paste the center of the sketch.
Click Edit,
Paste, or press Ctrl+V.
Related Topics
Add Relations/Properties PropertyManager
Cross Selection
Modify Sketch
Move or Copy PropertyManager