You can set the sheet properties when you add
a new sheet or edit
an existing sheet.
To specify sheet properties:
In the drawing sheet, right-click the sheet icon
in the FeatureManager design tree, any blank area of the drawing sheet,
or the sheet tab at the bottom of the drawing window, and select Properties.
Specify properties as described below and click
Name. Enter a title in the box.
You can change the sheet name, which appears in a tab below the drawing
Scale. Set a scale
for the sheet.
Type of projection. Select First angle or Third
angle for Standard 3 View .
First angle is typically used
in Europe. Third angle is typically
used in the United States.
Next view label.
Specify the letter of the alphabet to be used for the next section
and detail views.
Specify the letter of the alphabet to be used for the next datum
size. Select a standard sheet size, or click Browse
and locate a custom
sheet format file.
Only show standard
format. Displays sheet formats that
use the drafting standard set in Document
Properties - Drafting Standard. When cleared, all formats for all
If you make changes to the Sheet Format, click to return to the default
Display sheet format. Display border, title block, and so on.
size. Specify a Width and Height.
Use custom property values from model
shown in. If more than one model is shown on the sheet and the
drawing contains notes that are linked to custom properties of a model,
select the view that contains the model whose properties you want to use.
If you do not specify otherwise, the properties of the model in the first
view inserted into the sheet are used. See Linking Notes
to Document Properties.