Hide Table of Contents

Transient Thermal Stress Analysis

Using a Design Study, you can automate the procedure to calculate static results based on selected temperature profiles from a transient thermal study.

To automate transient thermal stress analysis:

  1. Define and run a transient thermal study.

  2. Create a static study and modify its properties to activate thermal loading using temperature from the transient thermal study.

  3. Right-click the static study tab and select Create New Design Study.

  4. On the Design Study tab, in the Variables section, define a new parameter with any name, for example Steps.

  5. Link the time step value to the parameter:

    1. Right-click the static study name and select Properties.

    2. On the Flow/Thermal Effects tab of the Static dialog box, right-click the Time step box and select Link Values.

    3. In the Parameters dialog box, select the Steps parameter and click OK.

    4. Click OK.

  6. On the Design Study tab, clear the Optimization check box and define up to 10,000 steps for the Steps parameter.

You can select up to 25 locations for saving summary results.

  1. Run the Evaluation Design Study.

 The Results View tab of a Design Study list the results of different scenarios. You can plot the results on the body by selecting different sensors on the left frame of the Design Study tab. You can also plot different graphs depending on the quality of the study.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Transient Thermal Stress Analysis
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2010 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.