Hide Table of Contents

Displacement Plot

The Displacement Plot PropertyManager allows you to plot displacement and reaction force results for static, nonlinear, dynamic, drop test studies, or mode shapes for bucking and frequency studies.

Displacement results are available for nodes only.

Display

  • Component . Select a displacement or reaction force component to plot. Directions are based on the selected reference geometry.

  • Units . Select a unit for the displacement plot.

NOTE: You can control the display of the fringe plot using the Settings PropertyManager. Available for all displacement components.

Advanced Options

  • Plane, Axis, or Coordinate System . Select a reference plane or a reference axis to plot displacement.

  • Show PSD value. (Available for random vibration studies only.) When checked, the PSD values are shown for a particular solution step. Otherwise, the RMS values across the whole frequency range are shown.

  • Show as vector plot. Generates a vector plot where a vector is plotted at each node to show the magnitude and direction of the selected displacement or reaction force component. You can control the size and density of the vectors in a vector plot using the Vector Plot Options PropertyManager.

Plot Step

Available only for nonlinear, dynamic and drop test studies.

  • Plot for single step .

  • Time . Displays the time corresponding to the selected plot step.

  • Displays the frequency corresponding to the selected plot step. Available for harmonic and random vibration studies

    • Plot Step . Sets the step number at which the selected result is to be plotted.

  • Plot Bounds across All Steps .

    • Maximum. Displays the maximum algebraic values (envelope plot) across all solution steps.

    • Minimum. Displays the minimum algebraic values (envelope plot) across all solution steps.

    • Absolute maximum. Displays the absolute maximum values (envelope plot ) across all solution steps.Available only for frequency and buckling studies.

  • Mode Shape . Sets the mode shape number for which the displacement is to be plotted.

    • Frequency . Displays the frequency corresponding to the specified mode shape.

    • Load Factor . Displays the buckling load factor.

Deformed Shape

If checked, the selected displacement component is plotted on the deformed shape of the model.

  • Automatic. Displays the default Scale Factor that the program uses to scale the largest deformation to 10% of the largest dimension of the smallest box that surrounds the model.

  • True scale. Displays the actual deformed shape of the model (Scale Factor is 1.0).

  • Defined. Allows you to enter your own Scale Factor .  In most cases, a larger scale factor helps to appreciate the deflection.

Property

  • Include title text. If checked, type a custom title for the plot.

  • Associate plot with name view orientation. Allows you to associate a predefined view orientation with the active plot.

  • Associate with current view . Allows you to associate the current view with the active plot.

To plot a displacement component in a selected reference geometry:



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Displacement Plot
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2010 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.