Hide Table of Contents

Stress Plot

The Stress Plot PropertyManager allows you to plot stress results for static, nonlinear, dynamic, and drop test studies. The Stress Plot PropertyManager appears when you create a study.

Display

  • Solid and Shell. (Available only for mixed mesh studies with beams). Plots stress components for solids or shells only.

  • Beams. (Available only for mixed mesh studies with beams). Plots stress components for beam only.

  • Component . Select a stress component to plot. Directions are based on the selected reference geometry.

  • Units . Select the units of the stress plot.

NOTE: You can control the display of the fringe plot using the Settings PropertyManager.

  • Shell Face .

    • Top. Total stresses (bending + membrane) at the top face. For composite shell, Top refers to top face of selected ply in Ply number under Composite Options.

    • Bottom. Total stresses (bending + membrane) at the bottom face. For composite shell, Bottom refers to bottom face of selected ply in Ply number under Composite Options.

    • Membrane. Membrane stress component.

    • Bending. Bending stress component.

  • Beam Results. Select Axial, Bending in local direction 1, Bending in local direction 2, or Worst case. See Beams - Results

Advanced Options

  • Plane, Axis or Coordinate System . Select a reference plane, an axis, or a coordinate system to plot stress. Used for directional components only.

  • Show as vector plot. Generates a vector plot where a vector is plotted at each node to show the magnitude and direction of the selected stress component. You can control the size and density of the vectors in a vector plot using the Vector Plot Options PropertyManager. Available for directional components.

  • Show as tensor plot. Available only for von Mises stress (VON). The three principal stresses at nodes or at element centers are shown.

  • Node Values. Generates nodal stress plots. Linear interpolation is used, usually a smooth plot is generated.

  • Element Values. Generates stresses at centers of elements (one value/color for each element).

  • Average results across boundary for parts. If checked, the results at the common nodes between two components in the assembly are averaged.

Plot Step

Available only for nonlinear, dynamic and drop test studies.

  • Plot for Single Step .

  • . Displays the time corresponding to the selected plot step. Available for nonlinear, modal time history and drop test studies.

  • Displays the frequency corresponding to the selected plot step. Available for harmonic and random vibration studies

    • Plot Step . Sets the step number at which the selected result is to be plotted.

  • Plot Bounds across All Steps .

    • Maximum. Displays the maximum algebraic values (envelope plot) across all solution steps.

    • Minimum. Displays the minimum algebraic values (envelope plot) across all solution steps.

    • Absolute maximum. Displays the absolute maximum values (envelope plot ) across all solution steps.

Deformed Shape

If checked, the selected stress component is plotted on the deformed shape of the model.

  • Automatic. Displays the default Scale Factor that the program uses to scale the largest deformation to 10% of the largest dimension of the smallest box that surrounds the model.

  • True scale. Displays the actual deformed shape of the model (Scale Factor is 1.0) .

  • User defined. Allows you to enter your own Scale Factor .  In most cases, a larger scale factor helps to appreciate the deflection.

Composite Options

Available when the model uses composite shells.

  • Maximum across all plies. Displays the maximum stress values of the specified Component (envelope plot) across all plies. The program includes the Top and Bottom faces while searching for the extreme value across all plies.

  • Ply number. Select the ply number to show the stress. This option is not available when you select Maximum across all plies.

  • Display results in ply direction on composite surfaces. (Available only when SX: X Normal Stress is the stress component).  Shows stress along the ply direction on surface of the ply.

  • Display results in cross-ply direction on composite surfaces. (Available only when SY: Y Normal Stress is the stress component).  Shows stress in the transverse direction to the ply direction on surface of the ply.

Property

  • Include title text. If checked, type a custom title for the plot.

  • Associate plot with name view orientation. Allows you to associate a predefined view orientation with the active plot.

  • Associate with current view . Allows you to associate the current view with the active plot.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Stress Plot
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2010 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.