Hide Table of Contents

Factor of Safety

The Factor of Safety PropertyManager allows you to assess the safety of solid and shell models (sheet metals and surfaces) based on a failure criterion.

Factor of Safety - Step 1 of 3

  • Component . For assemblies and multibody parts, select All, or select a component or body from the menu.

  • Criterion . Failure criteria:

    • Maximum von Mises stress

    • Maximum shear stress (Tresca)

    • Mohr-Coulomb stress

    • Maximum Normal stress

    • Automatic. Automatically selects the most appropriate failure criterion across all element types. The software applies the following conditions:

      • The Default Failure Criterion assigned in the Material dialog box for each material.

      •  If you have not assigned a default failure criterion in the Material dialog box, the software assigns the Mohr-Coulomb stress criterion.

      • If you selected Max von Mises or Max shear (Tresca) criterion for a beam material, the software uses the yield strength as allowable stress.

      • If you selected Max normal or Mohr-Coulomb criterion for a beam material, the software uses the tensile strength as the allowable stress.

  • What does this mean. Displays the mathematical relation used by the Criterion.

Composite Options

Failure criteria for composites. (Available for models with composite shells only)

Property

  • Include title text. Lets you type a custom title for the plot.

  • Associate plot with name view orientation. Associates a predefined view orientation with the active plot.

  • Next . Goes to the next step.

Factor of Safety - Step 2 of 3

  • Units . Sets the stress units.

  • Set stress limit. Sets the property used for determining the stress limit:

    • to Yield strength. Sets the stress limit to yield strength.

    • to Ultimate strength. Sets the stress limit to ultimate strength.

    • to User defined. Sets the stress limit to a user-specified value.

If you selected Mohr-Coulomb stress criterion from the previous step, you must set the tensile and compressive stress limits.

  • Multiplication factor. Allows you to enter a multiplication factor for calculating the selected stress limit. For example, if you apply a factor of 0.5 to a yield strength stress limit of 2000 psi, Factor of Safety uses 0.5 x 2000 = 1000 psi for the stress limit.

  • Beam Results

  • Shell Results . Available for shells only. Select the shell face for which you want to perform the Factor of Safety:

    • Top

    • Bottom

    • Minimum

    • Maximum

You should run two checks: one for the top face, and the other for the bottom face.

  • Material involved. Displays the material names and properties related to the stress limits used by Factor of Safety.

Composite Options

Available for models with composite shells only.

  • Worst-case across all plies. Envelope plot for minimum FOS across all plies (including top and bottom faces of every ply).

  • Ply number. Allows you to select the ply number for the factor of safety output. This option is not available when Worst-case across all plies is selected. You can select the top or bottom face for the selected ply number.

  • Prev . Returns to the previous step.

  • Next . Goes to the next step.

Factor of Safety - Step 3 of 3

  • Factor of safety distribution. Plots the distribution of the factor of safety.

  • Areas below factor of safety. Plots the regions below the specified factor of safety (displayed in red color). Regions above the specified factor of safety are displayed in blue color.

  • Safety result. Lists the minimum factor of safety based on the selected criterion.

  • Prev . Returns to the previous step.

Related Topics

To use Factor of Safety



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Factor of Safety Wizard
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2010 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.