Hide Table of Contents

Running Feature Paint

Feature Paint allows you to copy feature parameters from one feature to others that you select. For instance, you can select a boss-extrude from one part and apply its parameters (such as depth) to another boss-extrude on a different part.

You can also select two different features and apply feature parameters. For example, select a sweep feature to apply its parameters (such as the texture and transparency properties) to a dome feature.

Sheet metal features are supported.

Parameters you can copy include:

  • depth

  • color

  • texture

  • optical properties (including ambience and specularity)

Limitations:

  • Unsupported sheet metal features: bend, fold, unfold, and welded corner.

  • If the source feature does not have texture but the target feature does, the target feature retains its texture properties.

  • Reference geometry entities cannot be painted from one feature to another. For example, an end condition of Up To Surface that references a surface cannot be painted.

To run Feature Paint:

  1. Click Feature Paint (Tools toolbar) or Tools, Feature Paint.

    The Feature Paint Task Pane opens.

  2. In the graphics area, select the feature whose parameters you want to copy.

    <feature name>@<part name>.sldprt appears in the Copy properties from box.

  3. In the graphics area, select one or more features to which you want the parameters applied. You can select a feature in the current part, or select a feature from a part in another open window.

    <feature name>@<part name>.sldprt appears in the Paste properties to box.

    The Feature properties box lists the following feature parameter information:

    • Parameter. The feature property to be copied.

    • Copy from

    • Paste to

    NOTES:

    • If there are no attributes listed in the Feature properties box, then no attributes are available to copy.

  4. Select Paste appearance properties to apply appearance properties (color, texture, and so on) only.

  5. Click Apply.

    The new attributes are updated immediately.

  6. Click Close.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Running Feature Paint
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2010 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.