Hide Table of Contents

Document Properties > Miscellaneous

Some document-level enumerators exist in the SolidWorks API that do not correspond to any of the options shown on the SolidWorks Tools > Options> Document Properties dialogs. Click the links to jump to the tables in this topic containing these miscellaneous document-level enumerators.

NOTE: Unlinked text does not have any miscellaneous document-level enumerators. Unlinked text is shown to help you more easily map these miscellaneous document-level enumerators with the document properties shown on the Tools > Options > Document Properties tab.

See System Options and Document Properties for details about system options and document properties.

 

Miscellaneous Document-level Enumerators

Related to categories on Document Properties tab

Not related to categories on Document Properties tab

Drafting Standard

Annotations

  - Balloons

  - Datums

  - Geometric Tolerances

  - Notes

  - Surface Finishes

  - Weld Symbols

Dimensions

  - Angle

  - Arc Length

  - Chamfer

  - Diameter

  - Hole Callout

  - Linear

  - Ordinate

  - Radius

Centerlines/Center Marks

Virtual Sharps

Tables

 - Bill of Materials

 - General

 - Hole

 - Revision

 - Title Block

View Labels

 - Auxiliary

 - Detail

 - Section

Detailing

Grid/Snap

Units

Line Font

Line Style

Line Thickness

Colors

Material Properties

Image Properties

Image Quality

Plane Display

Sheet Metal

DimXpert

Dimensions - Drafting Standard

PropertyManager

View menu

 

Detailing

Enumerator

Get/Set Methods

Return Value or <Value>

Comment

swDetailingAngularDimLeaderStyle

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingAngularDimLeaderStyle, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingAngularDimLeaderStyle, swUserPreferenceOption_e.swDetailingNoOptionSpecified, swDisplayDimensionLeaderText_e.<Value>)

See swDisplayDimensionLeaderText_e for valid options

Specifies the style of text placement for angular leaders

swDetailingAngularToleranceStyle

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingAngularDimLeaderStyle, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingAngularDimLeaderStyle, swUserPreferenceOption_e.swDetailingNoOptionSpecified, swTolType_e.<Value>)

See swTolType_e for valid options

Specifies the angular tolerance style

swDetailingChamferDimTextStyle

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingChamferDimTextStyle, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingChamferDimTextStyle, swUserPreferenceOption_e.swDetailingNoOptionSpecified, swDetailingChamferDimLeaderTextStyle_e.<Value>)

See swDetailingChamferDimLeaderTextStyle_e for valid options

Specifies how to display text relative to the leader

swDetailingCenterMarkShowLines

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingCenterMarkShowLines, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingCenterMarkShowLines, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

Specifies whether to display center mark lines

swDetailingCenterMarkUseCenterline

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingCenterMarkUseCenterline, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingCenterMarkUseCenterline, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

Specifies whether lines in center mark use font specified for centerlines

swDetailingDimFontHeight

IModelDocExtension::GetUserPreferenceDouble(swUserPreferenceDouble_e.swDetailingDimFontHeight, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceDouble(swUserPreferenceDouble_e.swDetailingDimFontHeight, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Double value in meters

Specifies height of dimensions

swDetailingDisplayWithBrokenLeaders

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingDisplayWithBrokenLeaders, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingDisplayWithBrokenLeaders, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

For ANSI dimensioning standard only; specifies whether to display broken leaders

swDetailingLinearDimLeaderStyle

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingLinearDimLeaderStyle, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingLinearDimLeaderStyle, swUserPreferenceOption_e.swDetailingNoOptionSpecified, swDisplayDimensionLeaderText_e.<Value>)

See swDisplayDimensionLeaderText_e for valid options

Specifies the style of text placement for linear leaders

swDetailingLinearToleranceStyle

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingLinearToleranceStyle, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingLinearToleranceStyle, swUserPreferenceOption_e.swDetailingNoOptionSpecified, swTolType_e.<Value>)

See swTolType_e for valid options

Specifies the linear tolerance style

swDetailingMaxAngularToleranceValue

IModelDocExtension::GetUserPreferenceDouble(swUserPreferenceDouble_e.swDetailingMaxAngularToleranceValue, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceDouble(swUserPreferenceDouble_e.swDetailingMaxAngularToleranceValue, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Double value

Specifies the maximum variation for the type of angular tolerance selected

swDetailingMaxLinearToleranceValue

IModelDocExtension::GetUserPreferenceDouble(swUserPreferenceDouble_e.swDetailingMaxLinearToleranceValue, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceDouble(swUserPreferenceDouble_e.swDetailingMaxLinearToleranceValue, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Double value in meters

Specifies maximum variation for type of linear tolerance selected

swDetailingMaxWitnessLineLength

IModelDocExtension::GetUserPreferenceDouble(swUserPreferenceDouble_e.swDetailingMaxWitnessLineLength, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceDouble(swUserPreferenceDouble_e.swDetailingMaxWitnessLineLength, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Double value in meters

Specifies maximum length for a witness line

swDetailingMinAngularToleranceValue

IModelDocExtension::GetUserPreferenceDouble(swUserPreferenceDouble_e.swDetailingMinAngularToleranceValue, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceDouble(swUserPreferenceDouble_e.swDetailingMinAngularToleranceValue, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Double value

Specifies minimum variation for type of angular tolerance selected

swDetailingMinLinearToleranceValue

IModelDocExtension::GetUserPreferenceDouble(swUserPreferenceDouble_e.swDetailingMinLinearToleranceValue, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceDouble(swUserPreferenceDouble_e.swDetailingMinLinearToleranceValue, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Double value in meters

Specifies minimum variation for type of linear tolerance selected

swDetailingNoteFontHeight

IModelDocExtension::GetUserPreferenceDouble(swUserPreferenceDouble_e.swDetailingNoteFontHeight, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceDouble(swUserPreferenceDouble_e.swDetailingNoteFontHeight, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Double value in meters

Specifies height of notes

swDetailingRadialDimLeaderStyle

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingRadialDimLeaderStyle, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingRadialDimLeaderStyle, swUserPreferenceOption_e.swDetailingNoOptionSpecified, swDisplayDimensionLeaderText_e.<Value>)

See swDisplayDimensionLeaderText_e for valid options

Specifies the style of text placement for radial leaders

swDetailingToleranceFitToDisplayAngular

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingToleranceFitToDisplayAngular, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingToleranceFitToDisplayAngular, swUserPreferenceOption_e.swDetailingNoOptionSpecified, swFitTolDisplay_e.<Value>)

If swTolType_e set to swTolFIT, swTolFITWITHTOL, or swTolFITTOLONLY, then see swFitTolDisplay_e for valid options

 

swDetailingToleranceFitToDisplayLinear

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingToleranceFitToDisplayLinear, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingToleranceFitToDisplayLinear, swUserPreferenceOption_e.swDetailingNoOptionSpecified, swFitTolDisplay_e.<Value>)

If swTolType_e set to swTolFIT, swTolFITWITHTOL, or swTolFITTOLONLY, then see swFitTolDisplay_e for valid options

 

Back to top

Dimensions - Drafting Standard

Enumerator

Get/Set Methods

Return Value or <Value>

Comment

swDetailingAutoInsertDimsMarkedForDrawing

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingAutoInsertDimsMarkedForDrawing, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingAutoInsertDimsMarkedForDrawing, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

Specifies whether to automatically insert dimensions marked for the drawing in new drawing views; see IDisplayDimension::MarkedForDrawing for details about marking dimensions for drawings

swDetailingDimensionsAngularToleranceUseParentheses

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingDimensionsAngularToleranceUseParentheses, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingDimensionsAngularToleranceUseParentheses, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

For bilateral, symmetric, or fit-with-tolerance types only; specifies whether to show parentheses around angular tolerances

swDetailingDimensionStandardName

IModelDocExtension::GetUserPreferenceString(swUserPreferenceString_e.swDetailingDimensionStandardName, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceString(swUserPreferenceString_e.swDetailingDimensionStandardName, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Valid string values:

  • ANSI

  • ISO

  • DIN

  • JIS

  • BSI

  • GOST

  • GB

Detailing standard

swDetailingDimLeaderOverrideStandard

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingDimLeaderOverrideStandard, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingDimLeaderOverrideStandard, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

Specifies whether to override standard's leader display

swDetailingDimOffsetText

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingDimOffsetText, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingDimOffsetText, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

Specifies whether to offset dimension text or not

swDetailingDimsFollowDimXpertLayout

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingDimsFollowDimXpertLayout, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingDimsFollowDimXpertLayout, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

Specifies whether to follow DimXpert dimension/annotation layout

swDetailingDimsSnapTextToGrid

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingDimsSnapTextToGrid, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingDimsSnapTextToGrid, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

Specifies whether to snap dimension text to grid in drawings or sketches

swDetailingShowHaloAroundAnnotation

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingShowHaloAroundAnnotation, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingShowHaloAroundAnnotation, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

Specifies whether to display a halo of space around dimensions or annotations that belong to the drawing view or a sketch and are on top of an area hatch

Back to top

Dimensions - Hole Callout

Enumerator

Get/Set Methods

Return Value or <Value>

Comment

swDetailingDualDimPosition

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingDualDimPosition, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swDetailingDualDimPosition, swUserPreferenceOption_e.swDetailingNoOptionSpecified, swDetailingDualDimPosition_e.<Value>)

See swDetailingDualDimPosition_e for valid options

Allows the display of dimensions in two kinds of units

Back to top

Grid/Snap

Enumerator

Get/Set Methods

Return Value or <Value>

Comment

swSnapOnlyIfGridDisplayed

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swSnapOnlyIfGridDisplayed, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swSnapOnlyIfGridDisplayed, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

Specifies whether to snap to grid if swGridDisplay is turned on

swSnapToAngle

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swSnapToAngle, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swSnapToAngle, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

Specifies whether sketched lines snap to predefined angle

swSnapToAngleValue

IModelDocExtension::GetUserPreferenceDouble(swUserPreferenceDouble_e.swSnapToAngleValue, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceDouble(swUserPreferenceDouble_e.swSnapToAngleValue, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Double value

Specifies angle to which sketched lines should snap

swSnapToPoints

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swSnapToPoints, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swSnapToPoints, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

Specifies whether points snap to grid

Back to top

Material Properties

Enumerator

Get/Set Methods

Return Value or <Value>

Comment

swMaterialPropertySolidFill

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swMaterialPropertySolidFill, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swMaterialPropertySolidFill, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

For parts only; specifies whether to set the fill for area hatch or solid

Back to top

Notes

Enumerator

Get/Set Methods

Return Value or <Value>

Comment

swDetailingNotesDisplayWithBentLeader

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingNotesDisplayWithBentLeader, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swDetailingNotesDisplayWithBentLeader, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

Specifies whether to display notes using bent leaders

Back to top

Plane Display

Enumerator

Get/Set Methods

Return Value or <Value>

Comment

swPlaneDisplayShowEdges

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swPlaneDisplayShowEdges, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swPlaneDisplayShowEdges, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

Edges of planes take the same color as the front and back faces, are not transparent, and are always displayed

Back to top

PropertyManager

Enumerator

Get/Set Methods

Return Value or <Value>

Comment

swPropertyManagerColorActiveClosedDivider

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorActiveClosedDivider, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorActiveClosedDivider, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Read-only integer value for RGB color in use

 

swPropertyManagerColorBackground

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorBackground, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorBackground, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Read-only integer value for RGB color in use

 

swPropertyManagerColor_Divider

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColor_Divider, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColor_Divider, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Read-only integer value for RGB color in use

 

swPropertyManagerColorEditBox

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorEditBox, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorEditBox, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Read-only integer value for RGB color in use

 

swPropertyManagerColor_EditText

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColor_EditText, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColor_EditText, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Read-only integer value for RGB color in use

 

swPropertyManagerColorImportantMessage

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorImportantMessage, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorImportantMessage, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Read-only integer value for RGB color in use

 

swPropertyManagerColorInnerBorder

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorInnerBorder, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorInnerBorder, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Read-only integer value for RGB color in use

 

swPropertyManagerColorLabelAndIcon

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorLabelAndIcon, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorLabelAndIcon, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Read-only integer value for RGB color in use

 

swPropertyManagerColorTitle

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorTitle, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorTitle, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Read-only integer value for RGB color in use

 

swPropertyManagerColorOuterBorder

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorOuterBorder, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorOuterBorder, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Read-only integer value for RGB color in use

 

swPropertyManagerColorTopBorder

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorTopBorder, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorTopBorder, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Read-only integer value for RGB color in use

 

swPropertyManagerColorDivider

IModelDocExtension::GetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorDivider, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceInteger(swUserPreferenceInteger_e.swPropertyManagerColorDivider, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Read-only integer value for RGB color in use

 

Back to top

View

Enumerator

Get/Set Methods

Return Value or <Value>

Comment

swDisplayCameraFOVBox

IModelDocExtension::GetUserPreferenceToggle(swUserPreferenceToggle_e.swDisplayCameraFOVBox, swUserPreferenceOption_e.swDetailingNoOptionSpecified)

IModelDocExtension::SetUserPreferenceToggle(swUserPreferenceToggle_e.swDisplayCameraFOVBox, swUserPreferenceOption_e.swDetailingNoOptionSpecified, <Value>)

Boolean value

Specifies whether to display Field of View (FOV) box in the graphics area when viewing through a camera

Back to top

 



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Document Properties > Miscellaneous
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2010 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.