Get DimXpert Sphere Feature Example (VBA)
This example shows how to build a part and get attributes
for the following DimXpert feature:
*
Sphere
'-------------------------------------------------
' Preconditions:
' 1.
Open:
' <SolidWorks_install_dir>\samples\tutorial\cosmosfloxpress\ball valve\ball.sldprt.
' 2.
Open the DimXpert toolbar from View > Toolbars
' (select the first instance
of Toolbars on the View menu).
' 3.
Click the Add DimXpert datum icon on the DimXpert toolbar.
' 4.
Click on the ball of the part.
' 5.
Click away from the part to place the datum annotation.
' 6.
Click the green check mark to accept the new datum feature.
' 7.
Observe the following DimXpert features on the DimXpertManager tab:
' Sphere1.
' 8.
Open an Immediate window in the IDE.
' 9.
Ensure that the latest SolidWorks DimXpert type library is loaded
' in Tools
> References.
'10.
Run this macro (F5).
'
' Postconditions: Compare
the output in the Immediate Window
' with the features displayed on the DimXpertManager tab of the Management Panel.
' NOTE:
Because this part is used in a SolidWorks online tutorial,
' do not save
any changes when you close it.
'--------------------------------------------------
Option Explicit
Dim swApp As SldWorks.SldWorks
Dim swModel As ModelDoc2
Dim swModelDocExt As ModelDocExtension
Dim swSelMgr As SelectionMgr
Dim swConfig As Configuration
Dim swFeature As feature
Dim swAnn As feature
Dim swSchema As DimXpertManager
Dim swDXPart As DimXpertPart
Dim featureType As swDimXpertFeatureType_e
Dim features As Variant
Dim appliedFeatures As Variant
Dim appliedAnnotations As Variant
Dim appliedAnnotation As DimXpertAnnotation
Dim feature As DimXpertFeature
Dim appliedFeature As DimXpertFeature
Dim msgStr As String
Dim msgStr2 As String
Dim msgStr3 As String
Dim msgStr4 As String
Dim n As Long
Dim o As Long
Dim p As Long
Dim boolstatus As Boolean
Sub main()
Set
swApp = Application.SldWorks
Set
swModel = swApp.ActiveDoc
Set
swModelDocExt = swModel.Extension
Set
swSelMgr = swModel.SelectionManager
'
Get the default DimXpert schema using IModelDocExtension.DimXpertManager()
Set
swSchema = swModelDocExt.DimXpertManager("Standard", True)
'
Get IDimXpertPart from the IDimXpertManager
Set
swDXPart = swSchema.DimXpertPart
Dim
featCount As Long
featCount
= swDXPart.GetFeatureCount
msgStr
= "Total of "
msgStr2
= featCount
msgStr
= msgStr + msgStr2 + " features in " + (swSchema.SchemaName)
Debug.Print
""
Debug.Print
msgStr
'
Get IDimXpert features through IDimXpertPart
features
= swDXPart.GetFeatures
msgStr
= (swSchema.SchemaName) + " has the following features: "
Debug.Print
""
Debug.Print
msgStr
For
n = 0 To UBound(features)
Set
feature = features(n)
Debug.Print
" "
+ "Feature name: " + (feature.Name)
featureType
= feature.Type
Call
GetPatternType(featureType, msgStr2)
msgStr
= " Feature
type "
msgStr3
= " is suppressed on the DimXpertManager tab? "
msgStr4
= feature.IsSuppressed()
Debug.Print
msgStr + msgStr2 + msgStr3 + msgStr4
msgStr
= " "
+ "Model feature: "
Set
swFeature = feature.GetModelFeature()
If
Not (swFeature Is Nothing) Then
msgStr2
= swFeature.GetTypeName2()
Debug.Print
msgStr + msgStr2
End
If
msgStr
= " "
+ "Number of SolidWorks face entities in this feature: "
msgStr2
= feature.GetFaceCount
Debug.Print
msgStr + msgStr2
msgStr
= " "
+ "Number of applied features: "
msgStr2
= feature.GetAppliedFeatureCount()
Debug.Print
msgStr + msgStr2
appliedFeatures
= feature.GetAppliedFeatures()
If
Not (IsEmpty(appliedFeatures)) Then
For
o = 0 To UBound(appliedFeatures)
Set
appliedFeature = appliedFeatures(o)
Debug.Print
" "
+ "Applied feature name: " + (appliedFeature.Name)
Next
End
If
msgStr
= " "
+ "Number of applied annotations: "
msgStr2
= feature.GetAppliedAnnotationCount()
Debug.Print
msgStr + msgStr2
appliedAnnotations
= feature.GetAppliedAnnotations()
If
Not (IsEmpty(appliedAnnotations)) Then
For
p = 0 To UBound(appliedAnnotations)
Set
appliedAnnotation = appliedAnnotations(p)
Debug.Print
" "
+ "Applied annotation name: " + (appliedAnnotation.Name)
Next
End
If
Debug.Print
" "
Next
'
If you know the name of a DimXpert feature, you can get it directly using
IDimXpertPart.GetFeature("name"),
'
which can return a general IDimXpertFeature or a more specific interface
on the feature
'
Get IDimXpertSphereFeature for
the Sphere-101 feature
Dim
sphereFeature As IDimXpertSphereFeature
Set
sphereFeature = swDXPart.GetFeature("Sphere-101")
msgStr
= sphereFeature.Name + "
is a DimXpert feature"
Debug.Print
""
Debug.Print
msgStr
Debug.Print
""
'
Get the nominal sphere coordinates
Dim
radius As Double
Dim
x As Double
Dim
y As Double
Dim
z As Double
Debug.Print
"Nominal sphere of Sphere-101"
Debug.Print
""
boolstatus
= sphereFeature.GetNominalSphere(radius,
x, y, z)
msgStr
= "Radius is "
msgStr2
= radius
Debug.Print
msgStr + msgStr2
msgStr
= "X-coordinate is "
msgStr2
= x
Debug.Print
msgStr + msgStr2
msgStr
= "Y-coordinate is "
msgStr2
= y
Debug.Print
msgStr + msgStr2
msgStr
= "Z-coordinate is "
msgStr2
= z
Debug.Print
msgStr + msgStr2
Debug.Print
""
'
Get whether the sphere is a hole or a pin
boolstatus
= sphereFeature.Inner
msgStr
= "The sphere is a hole and not a pin: "
msgStr2
= boolstatus
Debug.Print
msgStr + msgStr2
End Sub
Public Sub GetPatternType(ByRef featureType, ByRef msgStr2)
If
(featureType = swDimXpertFeature_Plane) Then
msgStr2
= "Plane"
ElseIf
(featureType = swDimXpertFeature_Cylinder) Then
msgStr2
= "Cylinder"
ElseIf
(featureType = swDimXpertFeature_Cone) Then
msgStr2
= "Cone"
ElseIf
(featureType = swDimXpertFeature_Extrude) Then
msgStr2
= "Extrude"
ElseIf
(featureType = swDimXpertFeature_Fillet) Then
msgStr2
= "Fillet"
ElseIf
(featureType = swDimXpertFeature_Chamfer) Then
msgStr2
= "Chamfer"
ElseIf
(featureType = swDimXpertFeature_CompoundHole) Then
msgStr2
= "CompoundHole"
ElseIf
(featureType = swDimXpertFeature_CompoundWidth) Then
msgStr2
= "CompoundWidth"
ElseIf
(featureType = swDimXpertFeature_CompoundNotch) Then
msgStr2
= "CompoundNotch"
ElseIf
(featureType = swDimXpertFeature_CompoundClosedSlot3D) Then
msgStr2
= "CompoundClosedSlot3D"
ElseIf
(featureType = swDimXpertFeature_IntersectPoint) Then
msgStr2
= "IntersectPoint"
ElseIf
(featureType = swDimXpertFeature_IntersectLine) Then
msgStr2
= "IntersectLine"
ElseIf
(featureType = swDimXpertFeature_IntersectCircle) Then
msgStr2
= "IntersectCircle"
ElseIf
(featureType = swDimXpertFeature_IntersectPlane) Then
msgStr2
= "IntersectPlane"
ElseIf
(featureType = swDimXpertFeature_Pattern) Then
msgStr2
= "Pattern"
ElseIf
(featureType = swDimXpertFeature_Sphere)
Then
msgStr2
= "Sphere"
ElseIf
(featureType = swDimXpertFeature_BestfitPlane) Then
msgStr2
= "Bestfit Plane"
ElseIf
(featureType = swDimXpertFeature_Surface) Then
msgStr2
= "Surface"
End
If
End Sub