> Simulation > Analysis Background > Beams and Trusses
Introduction
Administration
User Interface
SolidWorks Fundamentals
Moving from 2D to 3D
Assemblies
CircuitWorks
Configurations
Design Checker
Design Studies in SolidWorks
Drawings and Detailing
DFMXpress
DriveWorksXpress
FloXpress
Import and Export
Large Scale Design
Model Display
Mold Design
Motion Studies
Parts and Features
Routing
Sheet Metal
Simulation
Welcome to SolidWorks Simulation Online Help
Access to Help
Conventions
Legal Notices
Analysis Background
SolidWorks Simulation Reference
Analysis Background
Linear Static Analysis
Frequency Analysis
Dynamic Analysis
Linearized Buckling Analysis
Thermal Analysis
Nonlinear Static Analysis
Drop Test Analysis
Fatigue Analysis
Pressure Vessel Overview
Beams and Trusses
2D Simplification
Simulation Fundamentals
Simulation Interface
Simulation Options
Simulation Studies
Design Studies
2D Simplification Study
Composite Shells
Loads and Restraints
Meshing
Material Properties
Parameters
Analysis Library
Viewing Results
Study Reports
Checking Stress Results
SimulationXpress
Sketching
Sustainability Products
SolidWorks Utilities
Tolerancing
Toolbox
Weldments
Workgroup PDM
Troubleshooting
Glossary
Hide Table of Contents Show Table of Contents

Beams and Trusses

You can simplify structural beams to optimize performance in Simulation to be modeled with beam elements. The size of the problem and the resources required are dramatically reduced in this case. For the beam formulation to produce acceptable results, the length of the beam should be 10 times larger than the largest dimension of its cross section.

Beam elements are supported for static, frequency, buckling, and nonlinear studies. Large displacement solution in static studies is not supported for beams.

Straight and Curved Beams
Each straight structural member is defined by a straight line connecting two joints at its ends. A curved structural member is modeled with a number of straight beams. The cross-section of a beam is assumed to be constant throughout its length. Internally, the program meshes each beam by creating a number of beam elements. Each beam element is defined by two end nodes and a cross-section. When viewing the mesh and results, beam elements are represented by cylinders regardless of the actual cross-section.

The image illustrates how a structural member is modeled. The top image shows the structural member. The middle image shows the joints when the structural member is defined as a beam. The lower image shows the mesh, where the beam is subdivided into a number of beam elements represented by cylinders.

Tapered Beams
You can treat tapered geometries as beams with varying cross-sectional size along their lengths. The image shows a tapered I-section beam with cross-sectional size that decreases along the direction shown. The tapered beam is represented by a straight line (neutral axis) connecting the two end joints. The lower image shows the mesh, where the beam is subdivided into a number of tapered beam elements represented by cylinders. Each element consists of two nodes having different cross-sectional areas. The mesh and the result plots give you a visual indication of the taper along the beam length.

Creating Beams
Structural members that are created as Weldment features mesh with beam elements by default. You can treat these structural members as solids by selecting their icons in the Simulation study tree and select Treat as Solid. For short structural members (ratio of length over largest orthogonal cross-sectional distance from the centroid is less than 3.0), it is recommended to use a solid mesh.

To treat extruded, lofted, mirrored, or imported bodies that have a constant cross-sectional shape and same or different cross-sectional size across their length as beams, select their icons in the Simulation study tree and select Treat as Beam.

The option Treat as Beam is not available when the ratio of a body's length over the largest orthogonal cross-sectional distance from the centroid is less than 3.0. This limitation applies only to structural members created with features such as Extrude, Revolve, Sweep, etc.

You can define a structural member as a truss or beam in the Apply/Edit Beam PropertyManager.



Related SolidWorks Forum Content

Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Beams and Trusses
*Comment:  
x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2011 SP05

The search functionality within the web help is in a beta test phase and you may experience periodic delays or interruptions in its performance. These are the normal and ordinary features of a beta test and shall not under any circumstances give rise to any liability on the part of Dassault Systèmes SolidWorks Corporation or its licensors. The topics within the Web-based help are not beta topics; they document SOLIDWORKS 2011 SP05.

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.