For most sections in a report, you can add comments in the Section properties Comments box. For some sections, you can set additional options as listed below. Many of these options are self-explanatory and are listed here only for completeness.
- Description
- User-defined comments
- Assumptions
- User-defined comments
- Model Information
- Names of all referenced components and subassemblies
- Configuration name used in study
- Path to all documents listed
- Revision or last modified date
- Physical properties of each body
- Ply information for composites
- Study Properties
- Solution information including study name, analysis type, and mesh type
- Solver information including solver used in the study
- Solver options including properties of the selected study
- Result folder
- Units
- Unit system for:
- Length/Displacement
- Temperature
- Angular velocity
- Stress/Pressure
- Design Study Setup
- Material Properties
- Material details such as name, yield strength, tensile strength
- Values and graph of the material table
- Descriptive information for custom-defined materials
- Custom material properties defined by the user for the custom-defined materials.
- Thermal Loads
- Thermal load names, images, and details
- Loads & Fixtures
- Fixture names, images, details, and resultant forces
- Load names, images, and details
- Values and graphs of the loading for transient analysis
- Connector Definitions
- Types of connectors and details
- Connector forces
- Contact
- Types of contacts, images, and properties
- Mesh Information
- Mesh details and image
- Mesh control information (name, image, and details)
- Sensor Results
- Sensor names, locations, and details
- Resultant Forces
- Reaction forces
- Reaction moments
- Beams
- Select to include beam stresses or forces at:
- Joints
- Ends
- Extreme values
- Entire length
- Study Results
- Includes images of all the plots in the Results folder. Clear to manually add the desired images using insert image.
- Conclusion
- Appendix
- Includes an Appendix with external data, either embedded or linked. See user defined section.