Expand IntroductionIntroduction
Expand AdministrationAdministration
Expand User InterfaceUser Interface
Expand SolidWorks FundamentalsSolidWorks Fundamentals
Expand Moving from 2D to 3DMoving from 2D to 3D
Expand AssembliesAssemblies
Expand CircuitWorksCircuitWorks
Expand ConfigurationsConfigurations
Expand Design CheckerDesign Checker
Expand Design Studies in SolidWorksDesign Studies in SolidWorks
Collapse Drawings and DetailingDrawings and Detailing
Expand Detailing OverviewDetailing Overview
Expand AnnotationsAnnotations
Expand TablesTables
Expand Bill of Materials (BOM)Bill of Materials (BOM)
Expand Table Columns and RowsTable Columns and Rows
Adding Symbol Text to BOM or Table Cells
Expanding Tables
Expand Equations in TablesEquations in Tables
Expand Drafting StandardsDrafting Standards
Expand Print SettingsPrint Settings
Collapse DrawingsDrawings
Drawings Overview
Expand Getting Started in DrawingsGetting Started in Drawings
Expand Types of Drawing DocumentsTypes of Drawing Documents
Expand Standard Drawing ViewsStandard Drawing Views
Expand Derived Drawing ViewsDerived Drawing Views
Expand Drawing View Alignment and DisplayDrawing View Alignment and Display
Expand Drawing ToolsDrawing Tools
Expand Drawing OutputsDrawing Outputs
Expand Title Block ManagementTitle Block Management
Expand Print OptionsPrint Options
Collapse Dimensions in DrawingsDimensions in Drawings
Dimensions Overview
Inserting Dimensions into Drawings
Dimension Type
Dimensions Options
Aligning Dimensions and Notes
Dimension Alignment: Parallel/Concentric
Dimension Alignment: Collinear/Radial
Rapid Dimension
Autodimension
DimXpert
Parallel Dimensions
Reference Dimensions
Baseline Dimensions
Expand Ordinate DimensionsOrdinate Dimensions
Chamfer Dimensions
Expand Tolerance and PrecisionTolerance and Precision
Moving and Copying Dimensions
Modifying Dimensions
Deleting Dimensions
Expand Dimension PaletteDimension Palette
Extension Lines
Attaching Dimension Extension Lines
Hide/Show Dimensions
Dimensioning to Midpoints
Using Snap Options to Move Dimension Extension Lines
Jogging Extension Lines
Creating Jogs in Dimension Extension Lines
Multiple Jogs for Dimensions and Callouts
Expand DFMXpressDFMXpress
Expand DriveWorksXpressDriveWorksXpress
Expand FloXpressFloXpress
Expand Import and ExportImport and Export
Expand Large Scale DesignLarge Scale Design
Expand Model DisplayModel Display
Expand Mold DesignMold Design
Expand Motion StudiesMotion Studies
Expand Parts and FeaturesParts and Features
Expand RoutingRouting
Expand Sheet MetalSheet Metal
Expand SimulationSimulation
Expand SimulationXpressSimulationXpress
Expand SketchingSketching
Expand Sustainability ProductsSustainability Products
Expand SolidWorks UtilitiesSolidWorks Utilities
Expand TolerancingTolerancing
Expand ToolboxToolbox
Expand WeldmentsWeldments
Expand Workgroup PDMWorkgroup PDM
Expand TroubleshootingTroubleshooting
Expand GlossaryGlossary
Hide Table of Contents

Document Properties - Dimensions

You can specify document-level drafting settings for all dimensions.

Dimensions that are inserted using Insert Model Items, DimXpert, and other automated methods are placed on predefined locations that radiate out from the drawing view. You set the predefined locations in this dialog box.

To display this dialog box, in a drawing, click Options (Standard toolbar), select Document Properties, and then select Dimensions.

Overall drafting standard


Overall drafting standard Inherited from the selected Drafting Standard page settings.

Text


Font

Click to modify the font.


Each time you change the dimension font, the document-level font for each dimension type is updated accordingly.

Dual dimensions


Dual dimensions display Select to display dimensions in dual units.
Show units for dual display Select to display units for the second set of dimensions.
Dimension value position Top
Bottom
Right
Left

Primary precision


Unit Precision Select the number of digits included after the decimal point for the value.
Tolerance Precision Select the number of digits included after the decimal point for the tolerance.

Dual precision


Unit Precision Select the number of digits after the decimal point from the list for the value in the secondary units.
Tolerance Precision Select the number of digits after the decimal point for the tolerance values for the secondary units.

Fractional display


Style, the style for the display of fractional dimensions
Stack size, the size of the stacked fractions expressed as a percentage of the whole portion of the dimension
Show double prime mark ("), the display of double prime marks in fractional dimensions

Fractional dimensions are available only for lengths in IPS (inch-pound-second) units.

Stacked Fractional Dimension Size by Percentage

 
100%
50%

Bent leaders

Leader length Enter the length of the unbent portion of the leader.

Arrows


Size

Specify the three arrow size fields.

Select Scale with dimension height to re-scale the arrow size according to the height of the dimension extension line.
Style
Select a style from the list, and click a dimension style type button:

Offset distances


Offset distances

Sets the dimension distances from the model and from each successive location (as indicated by the red dimensions below). Offset distances must conform to the values assigned in Offset distances. The default offset distances are .40 inches (10.16 mm) from the model edge and .25 (6.35 mm) inches between dimensions.

Gaps
For baseline dimensions, specify the offset distances:
  • Between the model and the first dimension extension line
  • Between dimension extension lines
These values also control the spacing between dimensions that are offset from one another and from the model edge when using rapid dimensioning.
Annotation view layout

Select to use offset distances specifications from an annotation view. Clear to enter the gaps.


Break dimension extension/leader lines


Gap

Specify the gap in broken extension and leader lines.

Break only around dimension arrows

Select to display breaks only when the lines and arrows intersect.


To break the dimension lines, select the dimension and click Break Lines in the PropertyManager. When you break dimension lines, they break around nearby lines. If you move a dimension significantly, it might not break around nearby lines. To update the display, clear Break Lines for the selected dimension and click Break Lines again.

Extension lines


Gap

Specify the distance between the model and the dimension extension lines. This value also controls the gap between extension lines and center marks.

Beyond dimension line

Specify the length that the extension line extends beyond the dimension line.


Options

Leading zeros
Standard Leading zeros appear according to the overall drafting standard.
Show Zeros before decimal points are shown.
Remove Leading zeros do not appear.
Trailing Zeros
Smart Trailing zeros are trimmed for whole metric values, conforming to ANSI and ISO standards.
Standard Trailing zeros appear according to the ASME Y14.5M-1994 standard.
Show Trailing zeros are displayed according to the decimal places you specify for Units.
Remove Trailing zeros do not appear.
Show units of dimensions

Select to show dimension units in drawings.

Add parentheses by default

Select to display dimensions within parentheses.

To set the color, click Tools > Options > System Options > Colors. In Color scheme settings, select Dimensions, Non Imported (Driven).
Center between extension lines

Select to center dimensions between extension lines. This option also selects Center Dimension in PropertyManagers that contain the Center Dimension option.

When you drag dimension text between the extension lines, the dimension text snaps between the center of the extension lines.

Include prefix inside basic tolerance box

Select to include a text prefix inside tolerance boxes when you specify a prefix.

Display dual basic dimension in one box

Select to include dual dimensions in one basic tolerance box.

Show dimensions as broken in broken views

Select to break dimension lines for broken views.

Radial/Diameter leader snap angle

Modify the snap angle intervals used when you drag diameter, radial, or chamfer dimensions along radial locations.

Tolerance

Click to set the tolerance.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Document Properties - Dimensions
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2011 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.