Hide Table of Contents

Scenes and Lighting

Scenes and their lighting schemes are closely connected. Note that lighting works differently in SolidWorks compared with PhotoView.

Scene lighting can come from these sources:
  • Point, spot, and directional lights, which are visible in SolidWorks Open GL graphics, RealView, and PhotoView.
  • Lighting from the environment image of the scene, which is visible in PhotoView only. This source of lighting is high-quality and closely mimics the actual lighting available when the environment image was created.

In addition to controls for point, spot, and directional lights, you can control Scene Illumination when PhotoView is added in. These controls are available in the Scene PropertyManager, on the Illumination tab.

Lighting controls are separate for SolidWorks and PhotoView 360.
SolidWorks
By default, point, spot, and directional lights are on in SolidWorks.

Scene lighting is not possible in RealView, so you often need to illuminate models manually.

PhotoView
By default, lighting is off in PhotoView.

With lights off, you can use the realistic lighting provided by scenes, which is usually sufficient for rendering. You typically need additional lighting in PhotoView to illuminate occluded spaces in the model.

Saving a Scene

When you save a scene, all currently applied point, spot, and directional lights are saved as part of the scene. When you apply a new scene, all lights are replaced with the lighting scheme of the new scene. You can override these rules by selecting the lighting option Keep light when scene changes, available in PropertyManagers for directional, point, and spot lights.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Scenes and Lighting
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2011 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.