Hide Table of Contents

Body from Deformed Shape

You can save the true deformed shape of a part or assembly resulting from running a static or nonlinear study. You can save the deformed geometry as a new configuration or a new document. Use the generated geometry for simulation or manufacturing purposes. This functionality works for solid, shell, and mixed meshes with solids and shells, and is available in SolidWorks Simulation Professional and above.

For linear static studies, you can use this functionality to control the shape of the deformed model. For example, consider a planar plate subjected to a uniform pressure p. If you save and manufacture the deformed shape of the plate under a uniform pressure -p, the plate will be planar when the pressure p is applied.

Save Body As

Save as Configuration

Save the deformed shape of a part or assembly as a new configuration.

 

Configuration Name

Type the name of the new configuration.

Save as New Part

Save the deformed shape of a part or assembly in a new document. For nonlinear studies, the deformed shape of the last solution step is saved.

 

Part Name

Type the name of the new document.

Deformed shapes of assembly documents are saved as multibody parts.

To create a body from deformed shape:

  1. Run a static or nonlinear study.

  2. Right-click the Results folder  and select Create Body from Deformed Shape.

  1. In the PropertyManager, click Save as Configuration or Save as New Part .

  2. Type a configuration name or a new document name.

The new document is saved in the location of the original part or assembly.

  1. Click .



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Body from Deformed Shape
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2012 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.