Rotate Drawing View
You can rotate drawing views on a sheet, or you can rotate a drawing view out of its plane using 3D drawing view mode.
To rotate a drawing view:
-
Click Rotate View 
(View toolbar).
-
Select a view. (You can select a view before or after activating the tool.)
-
Rotate the view in one of these ways:
-
Drag the view in the graphics area. The view snaps to 45 degree increments, but you can drop the view at any angle.
-
Use the left and right arrow keys. The increment value specified for the arrow keys (under Tools, Options, System Options, View) is used.
-
In the dialog box, specify the Drawing view angle for a selected view.
-
Select from these options:
-
Dependent views update to change in orientation to update views that were created from the view you are rotating (projected views, for example).
-
Rotate center marks with view. You can also rotate center marks in the Center Mark PropertyManager.
-
Click Apply to update the views. You can rotate additional views, then click Close when you are finished.
To restore the view to its original rotation, right-click the view and select Alignment, Default Rotation.
Related Topics
Aligning Views
Rotating Views