This topic provides you with quick access to the enhancements in SolidWorks API 2012.

• Service Pack 5 
• Service Pack 4
• Service Pack 3
• Service Pack 2
• Service Pack 1
• Service Pack 0

Service Pack 5

New functionality

Major enhancements are the ability to:

• Automatically sequence equations in an order determined by SolidWorks to produce accurate results. See IEquationMgr::AutomaticSolveOrder.
• Dissolve into individual components the subassemblies or weldments in a BOM table. See IBomTableAnnotation::Dissolve.
• Restore the previously dissolved subassemblies or weldments in a BOM table. See IBomTableAnnotation::RestoreRestructuredComponents.
• Load future version documents. Get whether a document or component is for a future version of SolidWorks. See IModelDocExtension::IsFutureVersion.

New methods and property

IBomTableAnnotation APIs

• IBomTableAnnotation::Dissolve
• IBomTableAnnotation::RestoreRestructuredComponents

IEquationMgr APIs

• IEquationMgr::AutomaticSolveOrder 

IModelDocExtension APIs

• IModelDocExtension::IsFutureVersion

Back to top

Service Pack 4

New functionality

Major enhancements are the ability to:

• Get or set offset surfaces and faces. See ISurfaceOffsetFeatureData::Entities, ISurfaceOffsetSurfaces::GetEntitiesCount, ISurfaceOffsetFeatureData::IGetEntities, and ISurfaceOffsetFeatureData::ISetEntities.
• Expand or collapse nodes in FeatureManager design trees. See ITreeControlItem::Expanded and IFeatureManager::GetFeatureTreeRootItem2.
• Save a table to a PDF file. See ITableAnnotation::SaveAsPDF.

New methods and properties

IFeatureManager APIs

• IFeatureManager::GetFeatureTreeRootItem2 (obsoletes IFeatureManager::GetFeatureTreeRootItem)

IModelDocExtension APIs

• IModelDocExtension::MultiSelect2 (obsoletes IModelDocExtension::MultiSelect and IModelDocExtension::IMultiSelect)  

ISurfaceOffsetFeatureData APIs

• SurfaceOffsetFeatureData::Entities (obsoletes ISurfaceOffsetFeatureData::Faces)
• ISurfaceOffsetFeatureData::GetEntitiesCount (obsoletes ISurfaceOffsetFeatureData::GetFacesCount)
• ISurfaceOffsetFeatureData::IGetEntities (obsoletes ISurfaceOffsetFeatureData::IGetFaces)
• ISurfaceOffsetFeatureData::ISetEntities (obsoletes ISurfaceOffsetFeatureData::ISetFaces)

ITableAnnotation APIs

• ITableAnnotation::SaveAsPDF

ITreeControlItem APIs

• ITreeControlItem::Expanded

Obsolete methods and properties

IFeatureManager APIs

• IFeatureManager::GetFeatureTreeRootItem (superseded by IFeatureManager::GetFeatureTreeRootItem2)

IModelDocExtension APIs

• IModelDocExtension::MultiSelect and IModelDocExtension::IMultiSelect (superseded by IModelDocExtension::MultiSelect2)

ISurfaceOffsetFeatureData APIs

• ISurfaceOffsetFeatureData::Faces (supserseded by ISurfaceOffsetFeatureData::Entities)
• ISurfaceOffsetFeatureData::GetFacesCount (superseded by ISurfaceOffsetFeatureData::GetEntitiesCount)
• ISurfaceOffsetFeatureData::IGetFaces (superseded by ISurfaceOffsetFeatureData::IGetEntities)
• ISurfaceOffsetFeatureData::ISetFaces (superseded by ISurfaceOffsetFeatureData::ISetEntities)

Back to top

Service Pack 3

New functionality

Major enhancements are the ability to:

• Get or set whether to link or unlink display states to or from the active configuration. See IConfigurationManager::LinkDisplayStatesToConfigurations.

New property

IConfigurationManager API

• IConfigurationManager::LinkDisplayStatesToConfigurations

Back to top

Service Pack 2

• New functionality
• New methods and properties
• Obsoleted methods and properties

New functionality

Major enhancements are the ability to:

• Add and remove edges to and from edge flanges. See IEdgeFlangeFeatureData::AddEdges and IEdgeFlangeFeatureData::RemoveEdges.
• Get all sketch segments, including bend lines, from bend features that have flat patterns and those that do not. See IOneBendFeatureData::FlatPatternSketchSegments2, IOneBendFeatureData::GetFlatPatternSketchSegmentCount2, IOneBendFeatureData::IFlatPatternSketchSegments2.
• Get or set whether to show the detailed cut list in a BOM table. See IBomFeature::DetailedCutList.

New methods and properties

IBomFeature APIs

• IBomFeature::DetailedCutList

IEdgeFlangeFeatureData APIs

• IEdgeFlangeFeatureData::AddEdges
• IEdgeFlangeFeatureData::RemoveEdges

IOneBendFeatureData APIs

• IOneBendFeatureData::FlatPatternSketchSegments2 (obsoletes IOneBendFeatureData::FlatPatternSketchSegments)
• IOneBendFeatureData::GetFlatPatternSketchSegmentCount2 (obsoletes IOneBendFeatureData::GetFlatPatternSketchSegmentCount)
• IOneBendFeatureData::IFlatPatternSketchSegments2 (obsoletes IOneBendFeatureData::IFlatPatternSketchSegments)

Obsoleted methods and properties

IOneBendFeatureData APIs

• IOneBendFeatureData::FlatPatternSketchSegments (superseded by IOneBendFeatureData::FlatPatternSketchSegments2)
• IOneBendFeatureData::GetFlatPatternSketchSegmentCount (superseded by IOneBendFeatureData::GetFlatPatternSketchSegmentCount2)
• IOneBendFeatureData::IFlatPatternSketchSegments (superseded by IOneBendFeatureData::IFlatPatternSketchSegments2)

Back to top

Service Pack 1

• New functionality
• New methods 

New functionality

Major enhancements are the ability to:

• Create temporary elliptical curves. See IModeler::CreateEllipse and IModeler::ICreateEllipse. 

New methods

IModeler APIs

• IModeler::CreateEllipse
• IModeler::ICreateEllipse

Back to top

Service Pack 0

• New functionality
• New interfaces
• New methods, properties, and delegates
• Obsoleted interfaces, methods, properties, and delegates

New functionality

Major enhancements are the ability to:

• Open assemblies, selectively open assembly components, and manage snapshots in Large Design Review mode. See  IAssemblyDoc::SelectiveOpen, ISnapshot, IModelViewManager::AddSnapShot, IModelViewManager::DeleteSnapShot, IModelViewManager::GetSnapShot, IModelViewManager::GetSnapShots.

• Get whether a feature is frozen, get the location of the freeze bar, move the freeze bar, get whether there are pending updates to frozen features, update frozen features, and get whether a feature is the freeze bar. See IFeature::IsFrozen, IFeature::HasFrozenUpdatePending, IFeature::MoveFreezeBarTo, IFeatureManager::EditFreeze, IFeatureManager::GetFreezeLocation, IModelDocExtension::UpdateFrozenFeatures, IFeature::IsHiddenLock.
• Get whether a model document needs to be rebuilt, including model documents with frozen features. See IModelDocExtension::NeedsRebuild2.
• Determine whether any buttons of a CommandGroup are enabled. See ICommandGroup::HasEnabledButton.
• Get and set the faces to exclude from a Flat-Pattern feature. See IFlatPatternFeatureData::ExcludedFaces, IFlatPatternFeatureData::IGetExcludedFaces, IFlatPatternFeatureData::IGetExcludedFacesCount, IFlatPatternFeatureData::ISetExcludedFaces.
• Add objects to selection lists without preselecting them through the user interface. See ISelectionMgr::AddSelectionListObject, ISelectionMgr::AddSelectionListObjects, ISelectionMgr::ResumeSelectionList, ISelectionMgr::SuspendSelectionList.
• Sort bill of materials, hole, weldment cut list, and general tables. See IBomTableAnnotation::GetBomTableSortData, IBomTableAnnotation::Sort, IBomTableSortData, IGeneralTableAnnotation, IGeneralTableAnnotation::Sort, IHoleTableAnnotation::Sort, IWeldmentCutListAnnotation::Sort.
• Specify equal spacing between pattern instances in a circular-pattern feature. See IFeatureManager::FeatureCircularPattern3.
• Insert a DXF/DWG image feature into a part or drawing. See IFeatureManager::InsertDwgOrDxfFile2.
• Select chains of entities attached to a sketch segment. See ISketchSegment::SelectChain.
• Close a drawing without unloading its references from memory and reopen it. See ISldWorks::CloseAndReopen.
• Specify a configuration name when setting the file to open in response to SolidWorks events. See ISldWorks::SetPromptFilename2.
• Specify a rebuild option when activating documents. See ISldWorks::ActivateDoc3.
• Suppress multiple notifications while dragging or spinning the slider of a number box on a PropertyManager page. See IPropertyManagerPage2Handler9::OnNumberboxChanged and IPropertyManagerPage2Handler9::OnNumberBoxTrackingCompleted.
• Anchor notes. See INote::LockPosition.
• Automatically insert center marks. See IView::AutoInsertCenterMarks.
• Specify the math transform to use in interference detection. See IInterferenceDetectionMgr::GetComponentsTransformInterferenceCount, IInterferenceDetectionMgr::GetComponentsTransformInterference, IInterferenceDetectionMgr::IGetComponentsTransformInterference.
• Get and set display modes, appearance settings, transparency states, and visibility states of specified components in specified display states for a specified scope. See IAppearanceSetting, IDisplayStateSetting, IModelDocExtension::DisplayMode, IModelDocExtension::DisplayStateSpecMaterialPropertyValues, IModelDocExtension::GetAppearanceSetting, IModelDocExtension::GetDisplayStateSetting, IModelDocExtension::Transparency, IModelDocExtension::Visibility.
• Specify balloon options when creating balloon, auto balloon, and stacked balloon annotations. See IAutoBalloonOptions, IBalloonOptions,  IStackedBalloonOptions, IDrawingDoc::AutoBalloon5, IDrawingDoc::CreateAutoBalloonOptions, IModelDocExtension::CreateBalloonOptions, IModelDocExtension::CreateStackedBalloonOptions, IModelDocExtension::InsertBomBalloon2, IModelDocExtension::InsertStackedBalloon2.
• Get the number of virtual sharp witness lines and their geometry data. See IView::GetWitnessEntitiesCount, IView::GetWitnessGeomInfo, IView::IGetWitnessGeomInfo.
• Insert magnetic lines in drawing sheets. See IMagneticLine, ISheet::InsertMagneticLine, ISheet::GetMagneticLines, ISheet::IGetMagneticLines, ISheet::GetMagneticLinesCount.
• Insert bend table annotations in drawings. See IBendTable, IBendTableAnnotation, IView::InsertBendTable.
• Modify, insert, and delete the features, components, and reference entities of Smart Components. See ISmartComponentFeatureData, IComponent2::IsSmartComponent, IComponent2::GetSmartComponentData, IComponent2::SetSmartComponentData.
• Specify whether to color section view caps. See ISectionViewData::KeepCapColor.
• Get the fixed face of a flatten-bends feature. See IBendsFeatureData::GetFixedFace.  
• Get whether a feature is a hidden lock feature. See IFeature::IsHiddenLock.
• Isolate changed dimensions. See IDrawingDoc::IsolateChangedDimensions.
• Insert punch table annotations in flat pattern drawing views of sheet metal parts. See IPunchTable, IPunchTableAnnotation, IView::InsertPunchTable.  
• Select all edges in a part, all components in an assembly, or all entities in a drawing. See IModelDocExtension::SelectAll.
• Get whether a configuration needs to be updated. See IConfiguration::IsDirty.
• Insert a forming tool feature from the Design Library into a sheet metal part. See IFeatureManager::InsertFormToolFeature.
• Get or set the line styles of the edges in the components in assembly drawings. See IDrawingComponent::GetLineStyle, IDrawingComponent::GetLineThickness, IDrawingComponent::SetLineStyle, IDrawingComponent::SetLineThickness, IDrawingComponent::UseDocumentDefaults.
• Get the broken-out section feature data in a drawing view. See IView::GetBreakOutSectionCount, IView::GetBreakOutSections, IView::IGetBreakOutSections, IBrokenOutSectionFeatureData.
• Select an entity reference of direction when inserting an extruded surface. See IFeatureManager::FeatureExtruRefSurface2.
• Gets the curves that form the outline of a body. See IModeler::GetBodyOutline2.
• Get or set whether to exclude a feature from the cut list. See IFeature::ExcludeFromCutList.

Back to top

New interfaces

IAppearanceSetting APIs

• IAppearanceSetting::BlurryReflection
• IAppearanceSetting::Color
• IAppearanceSetting::Diffuse
• IAppearanceSetting::Luminous
• IAppearanceSetting::Reflection
• IAppearanceSetting::Specular
• IAppearanceSetting::SpecularColor
• IAppearanceSetting::SpecularSpread
• IAppearanceSetting::Transparent

IAutoBalloonOptions APIs

• IAutoBalloonOptions::CustomSize
• IAutoBalloonOptions::FirstItem
• IAutoBalloonOptions::IgnoreMultiple
• IAutoBalloonOptions::InsertMagneticLine
• IAutoBalloonOptions::ItemNumberIncrement
• IAutoBalloonOptions::ItemNumberStart
• IAutoBalloonOptions::ItemOrder
• IAutoBalloonOptions::Layername
• IAutoBalloonOptions::Layout
• IAutoBalloonOptions::LeaderAttachmentToFaces
• IAutoBalloonOptions::LowerText
• IAutoBalloonOptions::LowerTextContent
• IAutoBalloonOptions::ReverseDirection
• IAutoBalloonOptions::Size
• IAutoBalloonOptions::Style
• IAutoBalloonOptions::UpperText
• IAutoBalloonOptions::UpperTextContent

IBalloonOptions APIs

• IBalloonOptions::CustomSize
• IBalloonOptions::ItemNumberIncrement
• IBalloonOptions::ItemNumberStart
• IBalloonOptions::ItemOrder
• IBalloonOptions::Layername
• IBalloonOptions::LowerText
• IBalloonOptions::LowerTextContent
• IBalloonOptions::QuantityDenotationText
• IBalloonOptions::QuantityOverride
• IBalloonOptions::QuantityOverrideValue
• IBalloonOptions::QuantityPlacement
• IBalloonOptions::ShowQuantity
• IBalloonOptions::Size
• IBalloonOptions::Style
• IBalloonOptions::UpperText
• IBalloonOptions::UpperTextContent

IBendTable APIs

• IBendTable::GetFeature
• IBendTable::GetTableAnnotationCount
• IBendTable::GetTableAnnotations
• IBendTable::IGetTableAnnotations
• IBendTable::StartingValue
• IBendTable::TagStyle

IBendTableAnnotation APIs

• IBendTableAnnotation::BendTable

IBomTableSortData APIs

• IBomTableSortData::Ascending
• IBomTableSortData::ColumnIndex
• IBomTableSortData::DoNotChangeItemNumber
• IBomTableSortData::ItemGroups

IBrokenOutSectionFeatureData APIs

• IBrokenOutSectionFeatureData::AccessSelections
• IBrokenOutSectionFeatureData::Depth
• IBrokenOutSectionFeatureData::DepthReference
• IBrokenOutSectionFeatureData::EditSketch
• IBrokenOutSectionFeatureData::GetSketchSegmentCount
• IBrokenOutSectionFeatureData::IAccessSelections
• IBrokenOutSectionFeatureData::IGetSketchSegment
• IBrokenOutSectionFeatureData::ReleaseSelectionAccess
• IBrokenOutSectionFeatureData::SketchSegment

IDisplayStateSetting APIs

• IDisplayStateSetting::Entities
• IDisplayStateSetting::GetEntityCount
• IDisplayStateSetting::GetNameCount
• IDisplayStateSetting::IGetEntities
• IDisplayStateSetting::IGetNames
• IDisplayStateSetting::ISetEntities
• IDisplayStateSetting::ISetNames
• IDisplayStateSetting::Names
• IDisplayStateSetting::Option
• IDisplayStateSetting::PartLevel
• IDisplayStateSetting::RemoveAppearance

IGeneralTableAnnotation APIs

• IGeneralTableAnnotation::GeneralTable
• IGeneralTableAnnotation::Sort

IMagneticLine APIs

• IMagneticLine::AddNote
• IMagneticLine::Angle
• IMagneticLine::EndPoint
• IMagneticLine::EqualSpacing
• IMagneticLine::GetNotes
• IMagneticLine::GetNotesCount
• IMagneticLine::IGetNotes
• IMagneticLine::Length
• IMagneticLine::RemoveNote
• IMagneticLine::StartPoint

IPropertyManagerPage2Handler9 APIs

• IPropertyManagerPage2Handler9::AfterActivation
• IPropertyManagerPage2Handler9::AfterClose
• IPropertyManagerPage2Handler9::OnActiveXControlCreated
• IPropertyManagerPage2Handler9::OnButtonPress
• IPropertyManagerPage2Handler9::OnCheckboxCheck
• IPropertyManagerPage2Handler9::OnClose
• IPropertyManagerPage2Handler9::OnComboboxEditChanged
• IPropertyManagerPage2Handler9::OnComboboxSelectionChanged
• IPropertyManagerPage2Handler9::OnGainedFocus
• IPropertyManagerPage2Handler9::OnGroupCheck
• IPropertyManagerPage2Handler9::OnGroupExpand
• IPropertyManagerPage2Handler9::OnHelp
• IPropertyManagerPage2Handler9::OnKeystroke
• IPropertyManagerPage2Handler9::OnListboxRMBUp
• IPropertyManagerPage2Handler9::OnListboxSelectionChanged
• IPropertyManagerPage2Handler9::OnLostFocus
• IPropertyManagerPage2Handler9::OnNextPage
• IPropertyManagerPage2Handler9::OnNumberboxChanged
• IPropertyManagerPage2Handler9::OnNumberBoxTrackingCompleted
• IPropertyManagerPage2Handler9::OnOptionCheck
• IPropertyManagerPage2Handler9::OnPopupMenuItem
• IPropertyManagerPage2Handler9::OnPopupMenuItemUpdate
• IPropertyManagerPage2Handler9::OnPreview
• IPropertyManagerPage2Handler9::OnPreviousPage
• IPropertyManagerPage2Handler9::OnRedo
• IPropertyManagerPage2Handler9::OnSelectionboxCalloutCreated
• IPropertyManagerPage2Handler9::OnSelectionboxCalloutDestroyed
• IPropertyManagerPage2Handler9::OnSelectionboxFocusChanged
• IPropertyManagerPage2Handler9::OnSelectionboxListChanged
• IPropertyManagerPage2Handler9::OnSliderPositionChanged
• IPropertyManagerPage2Handler9::OnSliderTrackingCompleted
• IPropertyManagerPage2Handler9::OnSubmitSelection
• IPropertyManagerPage2Handler9::OnTabClicked
• IPropertyManagerPage2Handler9::OnTextboxChanged
• IPropertyManagerPage2Handler9::OnUndo
• IPropertyManagerPage2Handler9::OnWhatsNew
• IPropertyManagerPage2Handler9::OnWindowFromHandleControlCreated

IPunchTable APIs

• IPunchTable::CombineSameSize
• IPunchTable::CombineTags
• IPunchTable::DualDimensions
• IPunchTable::GetFeature
• IPunchTable::GetTableAnnotationCount
• IPunchTable::GetTableAnnotations
• IPunchTable::IGetTableAnnotations
• IPunchTable::ShowUnits
• IPunchTable::StartingValue
• IPunchTable::TagStyle

IPunchTableAnnotation APIs

• IPunchTableAnnotation::PunchTable

ISmartComponentFeatureData APIs

• ISmartComponentFeatureData::AccessSelections
• ISmartComponentFeatureData::ReleaseSelectionAccess

ISnapShot APIs

• ISnapShot::Activate
• ISnapShot::Comment
• ISnapShot::Name
• ISnapShot::ViewId

IStackedBalloonOptions APIs

• IStackedBalloonOptions::BalloonsPerLine
• IStackedBalloonOptions::CustomSize
• IStackedBalloonOptions::ItemNumberIncrement
• IStackedBalloonOptions::ItemNumberStart
• IStackedBalloonOptions::ItemOrder
• IStackedBalloonOptions::LayerName
• IStackedBalloonOptions::LowerText
• IStackedBalloonOptions::LowerTextContent
• IStackedBalloonOptions::QuantityDenotationText
• IStackedBalloonOptions::QuantityOverride
• IStackedBalloonOptions::QuantityOverrideValue
• IStackedBalloonOptions::QuantityPlacement
• IStackedBalloonOptions::ShowQuantity
• IStackedBalloonOptions::Size
• IStackedBalloonOptions::StackDirection
• IStackedBalloonOptions::Style
• IStackedBalloonOptions::UpperText
• IStackedBalloonOptions::UpperTextContent

Back to top

New methods, properties, and delegates

IAssemblyDoc APIs

• IAssemblyDoc::SelectiveOpen

IBendsFeatureData APIs

• IBendsFeatureData::GetFixedFace

IBomTableAnnotation APIs

• IBomTableAnnotation::GetBomTableSortData
• IBomTableAnnotation::Sort

ICommandGroup APIs

• ICommandGroup::HasEnabledButton

IComponent2 APIs

• IComponent2::GetSmartComponentData
• IComponent2::IsSmartComponent
• IComponent2::SetSmartComponentData

IConfiguration APIs

• IConfiguration::IsDirty

IDrawingComponent APIs

• IDrawingComponent::GetLineStyle
• IDrawingComponent::GetLineThickness
• IDrawingComponent::SetLineStyle
• IDrawingComponent::SetLineThickness
• IDrawingComponent::UseDocumentDefaults

IDrawingDoc APIs

• IDrawingDoc::AutoBalloon5 (obsoletes IDrawingDoc::AutoBalloon4)
• IDrawingDoc::CreateAutoBalloonOptions
• IDrawingDoc::IsolateChangedDimensions

IFeature APIs

• IFeature::ExcludeFromCutList
• IFeature::HasFrozenUpdatePending
• IFeature::IsFrozen
• IFeature::IsHiddenLock
• IFeature::MoveFreezeBarTo

IFeatureManager APIs

• IFeatureManager::EditFreeze
• IFeatureManager::FeatureExtruRefSurface2 (obsoletes IFeatureManager::FeatureExtruRefSurface)
• IFeatureManager::FeatureCircularPattern3 (obsoletes IFeatureManager::FeatureCircularPattern2)
• IFeatureManager::GetFreezeLocation
• IFeatureManager::InsertDwgOrDxfFile2 (obsoletes IFeatureManager::InsertDwgOrDxfFile)
• IFeatureManager::InsertFormToolFeature

IFlatPatternFeatureData APIs

• IFlatPatternFeatureData::ExcludedFaces
• IFlatPatternFeatureData::IGetExcludedFaces
• IFlatPatternFeatureData::IGetExcludedFacesCount
• IFlatPatternFeatureData::ISetExcludedFaces

IHoleTableAnnotation APIs

• IHoleTableAnnotation::Sort

IInterferenceDetectionMgr APIs

• IInterferenceDetectionMgr::GetComponentsTransformInterferenceCount
• IInterferenceDetectionMgr::GetComponentsTransformInterference
• IInterferenceDetectionMgr::IGetComponentsTransformInterference

IModelDocExtension APIs

• IModelDocExtension::CreateBalloonOptions
• IModelDocExtension::CreateStackedBalloonOptions
• IModelDocExtension::DisplayMode
• IModelDocExtension::DisplayStateSpecMaterialPropertyValues
• IModelDocExtension::GetAppearanceSetting
• IModelDocExtension::GetDisplayStateSetting
• IModelDocExtension::InsertBomBalloon2 (obsoletes IModelDocExtension::InsertBomBalloon)
• IModelDocExtension::InsertStackedBalloon2 (obsoletes IModelDocExtension::InsertStackedBalloon)
• IModelDocExtension::NeedsRebuild2 (obsoletes IModelDocExtension::NeedsRebuild) 
• IModelDocExtension::SelectAll
• IModelDocExtension::Transparency
• IModelDocExtension::UpdateFrozenFeatures
• IModelDocExtension::Visibility

IModeler APIs

• IModeler::GetBodyOutline2 (obsoletes IModeler::GetBodyOutline) 

IModelViewManager APIs

• IModelViewManager::AddSnapShot
• IModelViewManager::DeleteSnapShot
• IModelViewManager::GetSnapShot
• IModelViewManager::GetSnapShots

INote APIs

• INote::LockPosition

ISectionViewData APIs

• ISectionViewData::KeepCapColor

ISelectionMgr APIs

• ISelectionMgr::AddSelectionListObject
• ISelectionMgr::AddSelectionListObjects
• ISelectionMgr::ResumeSelectionList
• ISelectionMgr::SuspendSelectionList

ISheet APIs

• ISheet::GetMagneticLines
• ISheet::GetMagneticLinesCount
• ISheet::IGetMagneticLines
• ISheet::InsertMagneticLine

ISketchSegment APIs

• ISketchSegment::SelectChain

ISldWorks APIs

• ISldWorks::ActivateDoc3 (obsoletes ISldWorks::ActivateDoc2)
• ISldWorks::CloseAndReopen
• ISldWorks::SetPromptFilename2 (obsoletes ISldWorks::SetPromptFilename)

IView APIs

• IView::AutoInsertCenterMarks
• IView::GetBreakOutSectionCount
• IView::GetBreakOutSections 
• IView::GetWitnessEntitiesCount
• IView::GetWitnessGeomInfo
• IView::IGetBreakOutSections 
• IView::IGetWitnessGeomInfo
• IView::InsertBendTable
• IView::InsertPunchTable

IWeldmentCutListAnnotation APIs

• IWeldmentCutListAnnotation::Sort

Back to top

Obsoleted interfaces, methods, properties, and delegates

IDrawingDoc APIs

• IDrawingDoc::AutoBalloon4 (superseded by IDrawingDoc::AutoBalloon5)

IFeatureManager APIs

• IFeatureManager::FeatureCircularPattern2 (superseded by IFeatureManager::FeatureCircularPattern3
• IFeatureManager::FeatureExtruRefSurface (superseded by IFeatureManager::FeatureExtruRefSurface2)
• IFeatureManager::InsertDwgOrDxfFile (superseded by IFeatureManager::InsertDwgOrDxfFile2)

IModelDocExtension APIs

• IModelDocExtension::InsertBomBalloon (superseded by IModelDocExtension::InsertBomBalloon2)
• IModelDocExtension::InsertStackedBalloon (superseded by IModelDocExtension::InsertStackedBalloon2)
• IModelDocExtension::NeedsRebuild (superseded by IModelDocExtension::NeedsRebuild2)

IModeler APIs

• IModeler::GetBodyOutline (superseded by IModeler::GetBodyOutline2)

IPropertyManagerPage2Handler8 APIs

• IPropertyManagerPage2Handler8::AfterActivation (superseded by

  IPropertyManagerPage2Handler9::AfterActivation)
• IPropertyManagerPage2Handler8::AfterClose (superseded by

  IPropertyManagerPage2Handler9::AfterClose)
• IPropertyManagerPage2Handler8::OnActiveXControlCreated (superseded by

  IPropertyManagerPage2Handler9::OnActiveXControlCreated)
• IPropertyManagerPage2Handler8::OnButtonPress (superseded by

  IPropertyManagerPage2Handler9::OnButtonPress)
• IPropertyManagerPage2Handler8::OnCheckboxCheck (superseded by

  IPropertyManagerPage2Handler9::OnCheckboxCheck)
• IPropertyManagerPage2Handler8::OnClose (superseded by

  IPropertyManagerPage2Handler9::OnClose)
• IPropertyManagerPage2Handler8::OnComboboxEditChanged (superseded by

  IPropertyManagerPage2Handler9::OnComboboxEditChanged)
• IPropertyManagerPage2Handler8::OnComboboxSelectionChanged (superseded by

  IPropertyManagerPage2Handler9::OnComboboxSelectionChanged)
• IPropertyManagerPage2Handler8::OnGainedFocus (superseded by

  IPropertyManagerPage2Handler9::OnGainedFocus)
• IPropertyManagerPage2Handler8::OnGroupCheck (superseded by

  IPropertyManagerPage2Handler9::OnGroupCheck)
• IPropertyManagerPage2Handler8::OnGroupExpand (superseded by

  IPropertyManagerPage2Handler9::OnGroupExpand)
• IPropertyManagerPage2Handler8::OnHelp (superseded by

  IPropertyManagerPage2Handler9::OnHelp)
• IPropertyManagerPage2Handler8::OnKeystroke (superseded by

  IPropertyManagerPage2Handler9::OnKeystroke)
• IPropertyManagerPage2Handler8::OnListboxRMBUp (superseded by

  IPropertyManagerPage2Handler9::OnListboxRMBUp)
• IPropertyManagerPage2Handler8::OnListboxSelectionChanged (superseded by

  IPropertyManagerPage2Handler9::OnListboxSelectionChanged)
• IPropertyManagerPage2Handler8::OnLostFocus (superseded by

  IPropertyManagerPage2Handler9::OnLostFocus)
• IPropertyManagerPage2Handler8::OnNextPage (superseded by

  IPropertyManagerPage2Handler9::OnNextPage)
• IPropertyManagerPage2Handler8::OnNumberboxChanged (superseded by

  IPropertyManagerPage2Handler9::OnNumberboxChanged)
• IPropertyManagerPage2Handler8::OnOptionCheck (superseded by

  IPropertyManagerPage2Handler9::OnOptionCheck)
• IPropertyManagerPage2Handler8::OnPopupMenuItem (superseded by

  IPropertyManagerPage2Handler9::OnPopupMenuItem)
• IPropertyManagerPage2Handler8::OnPopupMenuItemUpdate (superseded by

  IPropertyManagerPage2Handler9::OnPopupMenuItemUpdate)
• IPropertyManagerPage2Handler8::OnPreview (superseded by

  IPropertyManagerPage2Handler9::OnPreview)
• IPropertyManagerPage2Handler8::OnPreviousPage (superseded by

  IPropertyManagerPage2Handler9::OnPreviousPage)
• IPropertyManagerPage2Handler8::OnRedo (superseded by

  IPropertyManagerPage2Handler9::OnRedo)
• IPropertyManagerPage2Handler8::OnSelectionboxCalloutCreated (superseded by

  IPropertyManagerPage2Handler9::OnSelectionboxCalloutCreated)
• IPropertyManagerPage2Handler8::OnSelectionboxCalloutDestroyed (superseded by

  IPropertyManagerPage2Handler9::OnSelectionboxCalloutDestroyed)
• IPropertyManagerPage2Handler8::OnSelectionboxFocusChanged (superseded by

  IPropertyManagerPage2Handler9::OnSelectionboxFocusChanged)
• IPropertyManagerPage2Handler8::OnSelectionboxListChanged (superseded by

  IPropertyManagerPage2Handler9::OnSelectionboxListChanged)
• IPropertyManagerPage2Handler8::OnSliderPositionChanged (superseded by

  IPropertyManagerPage2Handler9::OnSliderPositionChanged)
• IPropertyManagerPage2Handler8::OnSliderTrackingCompleted (superseded by

  IPropertyManagerPage2Handler9::OnSliderTrackingCompleted)
• IPropertyManagerPage2Handler8::OnSubmitSelection (superseded by

  IPropertyManagerPage2Handler9::OnSubmitSelection)
• IPropertyManagerPage2Handler8::OnTabClicked (superseded by

  IPropertyManagerPage2Handler9::OnTabClicked)
• IPropertyManagerPage2Handler8::OnTextboxChanged (superseded by

  IPropertyManagerPage2Handler9::OnTextboxChanged)
• IPropertyManagerPage2Handler8::OnUndo (superseded by

  IPropertyManagerPage2Handler9::OnUndo)
• IPropertyManagerPage2Handler8::OnWhatsNew (superseded by

  IPropertyManagerPage2Handler9::OnWhatsNew)
• IPropertyManagerPage2Handler8::OnWindowFromHandleControlCreated (superseded by

  IPropertyManagerPage2Handler9::OnWindowFromHandleControlCreated)

ISldWorks APIs

• ISldWorks::ActivateDoc2 (superseded by ISldWorks::ActivateDoc3)
• ISldWorks::SetPromptFilename (superseded by ISldWorks::SetPromptFilename2)

Back to top