Hide Table of Contents

Bill of Materials for Routing Assemblies

When you create a BOM (Bill of Materials) for a route assembly, you can select a template that causes each unique cut length of pipe to be listed as a separate item. The template also assigns part numbers based on a configuration-specific property.

Otherwise, inserting and editing a BOM is the same as it is with other types of assembly drawings.

You can add a BOM to a routing assembly or to a selected drawing view for the routing assembly.

You can insert a table-based Bill of Materials or an Excel-based Bill of Materials in a drawing, but not both.

Create the template for the Routing Assembly BOM before you include the BOM with the assembly or drawing view.

To create a table-based bill of materials for a route assembly or selected drawing view:

  1. Click Insert, Tables, Bill of Materials.

  2. In the Bill of Materials PropertyManager, select a template under Table Template (bom-standard.sldbomtbt, for example).

  3. Set other options and click .

  4. Click in the graphics area to place the table.

To add a column to the bill of materials:

  1. Right-click in a column of the BOM table and select Insert, Column Left or Column Right.

  2. For Column Type, select a column type.

  3. Select a property from the list, for example SWPipeLength, under Route Property.

  4. Click .

The column is populated with values of the selected property.

To create an Excel-based BOM for a selected route assembly drawing view:

  1. Click Excel Based Bill of Materials (Table toolbar) or Insert, Tables, Excel Based Bill of Materials.

  2. In the Select BOM Template dialog box, browse to <install_dir>\lang\<language>, and select Piping BOM Template.xls.

  3. Select options in the Bill of Materials Properties dialog box, then click OK.

The BOM includes special columns for piping assemblies:

  • The PART NO. column displays the configuration-specific property SWbompartno (the sample routing parts include this property in the design tables).

  • Each configuration of a fitting has a different part number.

  • All route segments cut from the same raw stock have the same part number.

  • Each unique cut length of pipe is listed as a separate item using the property SWPipeLength, with the length displayed in the CUT LENGTH column.

If you edit the template in Excel, do not edit the text in the Name box for any of the default columns.

You can create custom columns in the Piping BOM Template. For example, you can create a column for the property SWElbowAngle (the angle of an elbow component).

See Bill of Materials - Custom Properties for more information.

Note also that there are hidden columns in the template; do not show, edit, or delete the hidden columns.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Bill of Materials for Routing Assemblies
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2012 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.