Hide Table of Contents

Component Part Number in Configurations

When you create configurations with a design table, the software automatically sets options in the Configuration Properties PropertyManager. Under Part number displayed when used in a bill of materials, the Configuration Name is selected. A bill of materials for an assembly that contains the document lists the part configuration name in the PART NO. column.

In a design table , the $PARTNUMBER parameter lets you specify a different value for the PART NO. column of the BOM. For an assembly document, this is the part number used when this configuration of the assembly appears in the BOM as a sub-assembly. The column header uses this syntax:

$PARTNUMBER

The column header is not case sensitive.

In the table body cells, type the part number for each configuration. The following table shows values that can be used with this parameter:

Value

Property Used

$D or $DOCUMENT

Document name

$P or $PARENT

Parent configuration name (derived configurations only)

$C or $CONFIGURATION

Configuration name

<any_text>

Custom name

<blank>

Configuration name

If multiple configurations of the same document are used in an assembly, the BOM lists each configuration by name as a separate item number. If you do not want each configuration listed separately in the BOM, do one of the following:

  • Assign the same value for the $PARTNUMBER parameter in all the configurations.

  • After the design table creates all of the configurations, edit the properties of each configuration, and select Document Name. To override the document name, you can use the Title specified under File, Properties for the component document.

Example of a design table that controls the value of a part number in a BOM with custom names:



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Component Part Number
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2012 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.