If you want to allow motion in an assembly, you can remove details from groups of components and allow motion between the groups.
In an assembly, click . In the PropertyManager, click Next .
Assembly Motion
|
Components to Group |
Specifies components to group together. Motion is allowed between groups, but not between components within a group. Select components and click Create Group. |
|
Group |
Lists the groups you create. Select a group to highlight it in the graphics area. To dissolve a group, click Delete Group. |
Mates
|
Mates |
Lists the mates that remain in the less-detailed assembly. |
Section View
Lets you see and select internal components or bodies.
|
Reference Section Plane/Face |
Specifies the plane or face to use to section the model. Select a plane or face, or click Front , Top , or Right to create the section view. Reverse Section Direction changes the direction of the cut. |
|
Offset Distance |
Offsets the section from the reference plane by a specified distance. |
|
X Rotation |
Rotates the section plane along the X-axis. |
|
Y Rotation |
Rotates the section plane along the Y-axis. |
In the FeatureManager design tree, you can right-click
Defeature and click
Edit Feature ,
Save Result,
Upload to 3DCC, or
Delete.