Hide Table of Contents

Hole Series (First Part) PropertyManager

The First Part is the part whose face you selected. Enter parameters for the Hole Series.

Hole Specification

The Hole Specification options vary depending on the hole type. Use the PropertyManager images and descriptive text to set the options.

Countersink

Counterbore

Clearance Hole

  • Standard. Select for example ANSI Metric or JIS.

  • Type. Select for example Hex Screw or Oval Head

  • Size. Select a size for the fastener.

  • Fit. Select a fit for the fastener: Close, Normal, or Loose.

Options

The Options vary depending on the hole type. Use the PropertyManager images and descriptive text to set the options such as:

  • Head clearance

  • Under head and near side diameter and angle

Custom Sizing

Sizing options vary depending on the hole type. Use the PropertyManager images and descriptive text to set the options such as diameter, depth, and angle.

You can override the value in the boxes. To revert to the default values, click Restore Default Values. The background color of the boxes is white for the default value, and yellow for the override value.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Hole Series (First Part) PropertyManager
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2012 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.23