Hide Table of Contents

Dimensions in Configurations

You can apply dimension values to selected configurations as follows:

  • In a part document, you can control the dimensions in sketches and in feature definitions.

  • In an assembly document, you can control dimensions that belong to assembly features. This includes mates (angle or distance), assembly feature cuts and holes, and component patterns (spacing or instance count). You can also control the dimensions of a component contained in the assembly (by manual method only).

Manual Method

To manually modify a dimension value for a selected configuration:

  1. Double-click the feature to display the dimension.

  2. Double-click the dimension, change the value in the Modify box, and select one of the following (these options are only available if there is more than one configuration in the model):

This Configuration

All Configurations

Specify Configurations

You can also right-click a dimension and select Configure dimension to configure the dimension.

Design Table

You can also control dimensions in a design table.

The column header in a design table for controlling dimensions uses this syntax:

Dimension@Feature or Dimension@Sketch<n>

For example, the full name for the depth of an extrude feature is D1@Extrude1; the full name for the dimension of the first Distance mate is D1@Distance1. You can assign meaningful names to dimensions in the Dimension PropertyManager, under Primary Value.

The column header is not case sensitive.

In the table body cells, type the value for the dimension. If a cell is left blank, it inherits the current dimension at the time the configuration is created.

NOTES

  • When you specify values, be sure to use the system of units specified for the model document (click Tools, Options, Document Properties, Units).

  • You can display dimensions that are driven by design tables in a different color. Click Tools, Options, System Options, Colors . Select Dimension, Controlled by Design Table in System colors and change the color.

 

Example of a design table that controls feature dimensions:



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Dimensions in Configurations
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2012 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.