Get DimXpert Extrude Feature Example (VB.NET)
This example shows how to build a part and get attributes
for the following DimXpert feature:
*
Extrude
'-----------------------------------------------------------------------------
' Preconditions:
' 1.
Open:
' <SolidWorks_install_dir>\samples\tutorial\api\plate_ads_plusminus.sldprt
' 2.
Open the DimXpert toolbar from View > Toolbars
' (select the first instance
of Toolbars on the View menu).
' 3.
Create the Extrude Feature:
' a.
Click the Auto Dimension Scheme icon on the DimXpert toolbar.
' b.
Ensure the Scope is set to All Features.
' c.
Click the green check mark to accept the settings.
' 4.
Observe the following DimXpert features on the DimXpertManager tab:
' Hole
Pattern1, Pocket1.
' 5.
Open an Immediate window in the IDE.
' 6.
Ensure that the SolidWorks.Interop.swdimxpert.dll
interop assembly
' is loaded (right-click
on project in Project Explorer,
' click Add Reference, click the .NET
tab).
' 7.
Run this macro (F5).
'
' Postconditions: Compare
the output in the Immediate Window
' with the features displayed on the DimXpertManager tab of the Management Panel.
' NOTE:
Because this part is used in a SolidWorks online tutorial,
' do not save
any changes when you close it.
'---------------------------------------------------------------------------
Imports SolidWorks.Interop.sldworks
Imports SolidWorks.Interop.swdimxpert
Imports SolidWorks.Interop.swconst
Imports System
Imports System.Diagnostics
Partial Class SolidWorksMacro
Dim
swModel As IModelDoc2
Dim
swModelDocExt As IModelDocExtension
Dim
swSelMgr As ISelectionMgr
Dim
swConfig As IConfiguration
Dim
swFeature As IFeature
Dim
swAnn As IFeature
Dim
swSchema As IDimXpertManager
Dim
swDXPart As IDimXpertPart
Dim
featureType As swDimXpertFeatureType_e
Dim
features As Object
Dim
appliedFeatures As Object
Dim
appliedAnnotations As Object
Dim
appliedAnnotation As IDimXpertAnnotation
Dim
feature As IDimXpertFeature
Dim
appliedFeature As IDimXpertFeature
Dim
msgStr As String
Dim
msgStr2 As String
Dim
msgStr3 As String
Dim
msgStr4 As String
Dim
n As Long
Dim
o As Long
Dim
p As Long
Dim
boolstatus As Boolean
Sub
main()
swModel
= swApp.ActiveDoc
swModelDocExt
= swModel.Extension
swSelMgr
= swModel.SelectionManager
'
Get the default DimXpert schema using IModelDocExtension.DimXpertManager()
swSchema
= swModelDocExt.DimXpertManager("Default", True)
'
Get IDimXpertPart from the IDimXpertManager
swDXPart
= swSchema.DimXpertPart
Dim
featCount As Long
featCount
= swDXPart.GetFeatureCount
msgStr
= "Total of "
msgStr2
= featCount
msgStr
= msgStr + msgStr2 + " DimXpert features in " + (swSchema.SchemaName)
Debug.Print("")
Debug.Print(msgStr)
'
Get IDimXpert features through IDimXpertPart
features
= swDXPart.GetFeatures
msgStr
= (swSchema.SchemaName) + " has the following features: "
Debug.Print("")
Debug.Print(msgStr)
For
n = 0 To UBound(features)
feature
= features(n)
Debug.Print("
"
+ "Feature name: " + (feature.Name))
featureType
= feature.Type
Call
GetPatternType(featureType, msgStr2)
msgStr
= " Feature
type "
msgStr3
= " is suppressed on the DimXpertManager tab? "
msgStr4
= feature.IsSuppressed()
Debug.Print(msgStr
+ msgStr2 + msgStr3 + msgStr4)
msgStr
= " "
+ "Model feature: "
swFeature
= feature.GetModelFeature()
If
Not (swFeature Is Nothing) Then
msgStr2
= swFeature.GetTypeName2()
Debug.Print(msgStr
+ msgStr2)
End
If
msgStr
= " "
+ "Number of SolidWorks face entities in this feature: "
msgStr2
= feature.GetFaceCount
Debug.Print(msgStr
+ msgStr2)
msgStr
= " "
+ "Number of applied features: "
msgStr2
= feature.GetAppliedFeatureCount()
Debug.Print(msgStr
+ msgStr2)
appliedFeatures
= feature.GetAppliedFeatures()
If
Not (IsNothing(appliedFeatures)) Then
For
o = 0 To UBound(appliedFeatures)
appliedFeature
= appliedFeatures(o)
Debug.Print("
"
+ "Applied feature name: " + (appliedFeature.Name))
Next
End
If
msgStr
= " "
+ "Number of applied annotations: "
msgStr2
= feature.GetAppliedAnnotationCount()
Debug.Print(msgStr
+ msgStr2)
appliedAnnotations
= feature.GetAppliedAnnotations()
If
Not (IsNothing(appliedAnnotations)) Then
For
p = 0 To UBound(appliedAnnotations)
appliedAnnotation
= appliedAnnotations(p)
Debug.Print("
"
+ "Applied annotation name: " + (appliedAnnotation.Name))
Next
End
If
Debug.Print("
")
Next
'
If you know the name of a DimXpert feature, you can get it directly using
IDimXpertPart.GetFeature("name"),
'
which can return a general IDimXpertFeature or a more specific interface
on the feature
'
Get IDimXpertExtrudeFeature for the Pocket1 feature
Dim
extrudeFeature As IDimXpertExtrudeFeature
extrudeFeature
= swDXPart.GetFeature("Pocket1")
msgStr
= extrudeFeature.Name + "
is a DimXpert extrude feature"
Debug.Print("")
Debug.Print(msgStr)
Debug.Print("")
'
Get the bottom blends
feature
= extrudeFeature.GetBottomBlends
If
Not feature Is Nothing Then
msgStr
= "The bottom blends for the extrude is "
msgStr2
= feature.Name
Debug.Print(msgStr
+ msgStr2)
Else
: Debug.Print("There are no bottom blends for this extrude.")
End
If
'
Get the bottom feature
feature
= extrudeFeature.GetBottomFeature
If
Not feature Is Nothing Then
msgStr
= "The bottom feature for the extrude is "
msgStr2
= feature.Name
Debug.Print(msgStr
+ msgStr2)
End
If
'
Get the reference feature
feature
= extrudeFeature.GetReferenceFeature
If
Not feature Is Nothing Then
msgStr
= "The reference feature for the extrude is "
msgStr2
= feature.Name
Debug.Print(msgStr
+ msgStr2)
End
If
'
Get the sub-features
Dim
featureCount As Integer
featureCount
= extrudeFeature.GetSubFeatureCount
msgStr
= "The number of sub-features of the extrude is "
msgStr2
= featureCount
Debug.Print(msgStr
+ msgStr2)
features
= extrudeFeature.GetSubFeatures
For
n = 0 To UBound(features)
feature
= features(n)
Debug.Print("
"
+ "Feature name: " + (feature.Name))
featureType
= feature.Type
Call
GetPatternType(featureType, msgStr2)
msgStr
= " Feature
type is "
Debug.Print(msgStr
+ msgStr2)
Next
'
Get whether the extrude is blind
boolstatus
= extrudeFeature.Blind
msgStr
= "The extrude is blind: "
msgStr2
= boolstatus
Debug.Print(msgStr
+ msgStr2)
End
Sub
Public
Sub GetPatternType(ByRef featureType As swDimXpertFeatureType_e, ByRef
msgStr2 As String)
If
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_Plane) Then
msgStr2
= "Plane"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_Cylinder) Then
msgStr2
= "Cylinder"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_Cone) Then
msgStr2
= "Cone"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_Extrude) Then
msgStr2
= "Extrude"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_Fillet)
Then
msgStr2
= "Fillet"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_Chamfer) Then
msgStr2
= "Chamfer"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_CompoundHole)
Then
msgStr2
= "CompoundHole"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_CompoundWidth)
Then
msgStr2
= "CompoundWidth"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_CompoundNotch)
Then
msgStr2
= "CompoundNotch"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_CompoundClosedSlot3D)
Then
msgStr2
= "CompoundClosedSlot3D"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_IntersectPoint)
Then
msgStr2
= "IntersectPoint"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_IntersectLine)
Then
msgStr2
= "IntersectLine"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_IntersectCircle)
Then
msgStr2
= "IntersectCircle"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_IntersectPlane)
Then
msgStr2
= "IntersectPlane"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_Pattern) Then
msgStr2
= "Pattern"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_Sphere) Then
msgStr2
= "Sphere"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_BestfitPlane)
Then
msgStr2
= "Bestfit Plane"
ElseIf
(featureType = swDimXpertFeatureType_e.swDimXpertFeature_Surface) Then
msgStr2
= "Surface"
End
If
End
Sub
Public
swApp As SldWorks
End Class