Hide Table of Contents

Organizing Solid Bodies

In the FeatureManager design tree, you can organize and manage solid bodies in several ways.

  • Group bodies into folders in Solid Bodies .
  • Select commands to apply to all bodies within a folder.
  • List the features that belong to each body.

The number of solid bodies in the part document appears in parentheses next to Solid Bodies . If several bodies are created from the same feature, an instance number appears in square brackets after each instance listed in Solid Bodies . For example, the following part contains two solid bodies created by one extruded cut:

You can toggle the display of hidden and shown bodies. Then in the graphics area, you can select which hidden bodies you want to show.

Grouping Bodies into Folders

To group bodies into folders:

  1. Expand Solid Bodies in the FeatureManager design tree.
  2. Right-click a solid body name, select Add to New Folder, and name the folder.

    The selected solid body is listed in the new folder. You can drag other bodies into the same folder, and create other new folders and subfolders.

Applying Commands to All Bodies in a Folder

To apply commands to all bodies within a folder:

  1. Right-click the folder.
  2. Select a command such as Hide Solid Body, Delete Body, Appearance, and so on.

    The command is applied to all bodies in the folder.

Listing the Features that Belong to Each Solid Body

To list the features that belong to each solid body:

  1. Right-click Solid Bodies in the FeatureManager design tree.
  2. Select Show Feature History.
  3. Expand the solid body to see the features that belong to that body.
  4. To hide the feature history, right-click Solid Bodies and clear Show Feature History.

Selecting Hidden Bodies

To select hidden bodies to be shown:

  1. In the graphics area, select the multibody part.
  2. Right-click the multibody part and select Show Hidden Bodies.

    All components, which were hidden, are shown and all the components, which were visible, are hidden.

  3. In the dialog box, click Exit Show Hidden.

    The multibody part that was originally shown reappears.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Organizing Solid Bodies
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.