Hide Table of Contents

Basic Commands: Cut, Copy, Paste, Undo, and Redo

Cut

Removes the selected items and places them on the Microsoft Windows Clipboard.

To cut:

  1. Select one or more items to cut.
  2. Click Cut (Standard toolbar) or Edit > Cut, or press Ctrl+X.

Copy

Copies one or more items to the Microsoft Windows Clipboard.

To copy:

  1. Select one or more items to copy.
  2. Click Copy (Standard toolbar) or Edit > Copy, or press Ctrl+C.

Paste

Copies the contents of the Clipboard to the current sketch, part, assembly, or drawing document.

To paste the contents of the Clipboard:

  1. If necessary, select an appropriate destination for the item being pasted. For example:

    If the Clipboard contains a sketch, select a face or a plane to paste the sketch on.

    If the Clipboard contains an extruded or revolved feature or a hole, select a face to paste the feature on.

  2. Click Paste or Edit > Paste, or press Ctrl+V.

Undo

Reverses recent changes you have made, when possible.

To undo your last action:

  • Click Undo (Standard toolbar) or Edit > Undo, or press Ctrl+Z.

Undoing Multiple Operations

To undo multiple operations:

  1. Click Undo List to see the list of actions that are available. The most recent actions are at the top.
  2. Select any action on the list. The action you select and all actions above it are reversed.

Redo

Reverses recent Undo commands, when possible. Redo is available only for sketches in part and assembly documents.

To redo your last Undo action:

  • Click Redo (Standard toolbar) or Edit > Redo, or press Ctrl+Y.

    If you have exited a sketch, you can still undo actions in the sketch. Return to Edit Sketch mode and click Undo .



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Basic Commands: Cut, Copy, Paste, Undo, and Redo
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.