Hide Table of Contents

Moving or Copying Sketch Entities

To move or copy entities:

  1. In sketch mode, do one of the following:
    • Click Move Entities Tool_Move_Entities_Sketch.gif (Sketch toolbar) or Tools > Sketch Tools > Move.
    • Click Copy Entities Tool_Copy_Entities_Sketch.gif (Sketch toolbar) or Tools > Sketch Tools > Copy.

    Dimensions are moved or copied to the new location with the entities. Relations are moved or copied only if you select Keep relations.

  2. In the PropertyManager, under Entities to Move or Entities to Copy:
    1. Select sketch entities for Sketch item or annotations.
    2. Select Keep relations to maintain relations between sketch entities. When cleared, relations are broken only between selected entities and those that are not selected; relations among the selected entities are maintained.
  3. Under Parameters:

    Sketch Type Instructions for modifying parameters
    2D Sketch

    3D Sketch On Plane

    		Do one of the following:
    • Select From/To, click Start point to set a Base point Base_point_Move_Copy.gif, and then drag to position the sketch entities.
    • Select X/Y and set values for Delta X PM_DeltaX_big.gif and Delta Y PM_DeltaY_big.gif to position the sketch entities.

    Click Repeat to modify the position of the sketch entities again by the same distance.
    3D Sketch Using the 3D triad:
    • Drag the sketch entities using the 3D move arrows:
      sketch_3D_move.gif

    For details on using the 3D triad to move or copy entities, see Dragging or Rotating Objects with the Triad.
    Using numeric values:
    • Under Translate, specify Delta X PM_DeltaX_big.gif, Delta Y PM_DeltaY_big.gif, and Delta Z PM_DeltaZ_big.gif.
    • Click Repeat to modify the position of the sketch entities again by the same distance.

  4. Click PM_OK.gif.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Moving or Copying Sketch Entities
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:
x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.59