Hide Table of Contents

Purging Configuration Data

To reduce the size of files and the time needed to save them, you can purge the cached configuration data of inactive configurations.

Purging the Data Manually

You can manually purge the data of inactive configurations.

  • At the top of the ConfigurationManager or FeatureManager design tree, right-click the model name, click Rebuild/Save Mark, and click Remove Mark and Purge Data for All Configurations.

    The Rebuild/Save mark cfgmgr_blue_save_disk.png is removed from all configurations including the active configuration. The data is purged for all configurations except the active one.

Purging the Data Automatically

You can set a system option to automatically purge the data every time you save the document.

  • Click Tools > Options > System Options > Performance and select Purge cached configuration data.

    Every time you save the document:

    • If the purge option is selected:
      • Data is purged for all inactive configurations flagged cfgmgr_checkmark_gray.gif or cfgmgr_dash_gray.gif.
      • Data is saved only for the active configuration (cfgmgr_checkmark_green.gif or cfgmgr_save_disk_blue.gif) and inactive configurations marked cfgmgr_save_disk_gray.gif.
    • If the purge option is not selected:
      • Data is rebuilt and saved for all configurations flagged cfgmgr_green_checkmark.png, cfgmgr_checkmark_gray.gif, cfgmgr_save_disk_blue.gif, or cfgmgr_save_disk_gray.gif.
      • Data is purged for all configurations flagged cfgmgr_dash_gray.gif.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Purging Configuration Data
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2013 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.