- Base Parts in Configurations
You can control the configuration of a base part with a design table. This is available in part documents only.
- Color Parameter in Configurations
The design table can include a column for configuration-specific colors. The value is a 32-bit integer that specifies RGB (red, green, blue). If no value is specified, zero (black) is used.
- Comment in Configurations
The Configuration Properties PropertyManager has a Comment box, where you can enter information about the configuration.
- Component Configuration
You can specify which configuration of a component is used in various configurations of an assembly.
- Component Part Number in Configurations
When you create configurations with a design table, the software automatically sets options in the Configuration Properties PropertyManager. Under Part number displayed when used in a bill of materials, the Configuration Name is selected. A bill of materials for an assembly that contains the document lists the part configuration name in the PART NO. column.
- Component Suppression State in Configurations
- Cosmetic Threads in Configurations
You can configure callouts for cosmetic threads.
- Custom Properties in Configurations
- Derived Configurations in Design Tables
You can control derived configurations in a design table.
- Description in Configurations
The Configuration Properties PropertyManager has a Description box, where you can enter a description of the configuration.
- Dimensions in Configurations
- Display States in Configurations
You can create multiple display states for each configuration of an assembly or part.
- End Conditions in Configurations
You can change the end condition of extruded features in specified configurations.
- Equations in Configurations
You can suppress or unsuppress equations in specified configurations.
- Expand in BOM in Configurations
You can control how the assembly is listed in a BOM, when this configuration is used as a subassembly.
- External Sketch Relations in Configurations
You can set different external sketch relations in specified configurations.
- Feature Suppression State in Configurations
- Fixed or Floating Position in Configurations
You can configure whether the position of a component is fixed or floating in an assembly.
- Global Variables in Configurations
You can configure global variables.
- Hole Sizes in Configurations
In the Hole Specification PropertyManager, you can configure the size of Hole Wizard holes by clicking Configurations and selecting This configuration, All configurations, or Specify Configurations.
- Lighting in Configurations
You can suppress and unsuppress (turn off and on) lights in configurations.
- Mass Properties in Configurations
You can configure values that you assign for mass, center of mass, and moments of inertia in parts and assemblies.
- Materials in Configurations
You can configure materials for parts and for bodies of multibody parts.
- Scale Features in Configurations
You can configure the X, Y, and Z scale factors.
- Sketch Dimensions in Configurations
You can control the driving state of sketch dimensions in specified configurations to control the behavior of your model.
- Sketch Planes in Configurations
The plane on which a sketch lies is configurable through the Sketch Plane PropertyManager. You can place a single sketch on different planes in different configurations.
- Sketch Relations in Configurations
You can control the suppression state of sketch relations per configuration.
- Sketch Suppression State in Configurations
- Split Parts in Configurations
You can control the configuration of a split part with a design table. This is available in part documents only.
- Tolerances in Configurations
- User Notes in Design Tables
The design table can include additional columns or rows for information only (notes, intermediate calculations, and so on).
- Obsolete Column Headers
The design table parameter $SHOW is obsolete.