Hide Table of Contents

Linking a Simulation Feature to a Parameter (Second Workflow)

In addition to linking parameters to Simulation features from the Parameters dialog box, you can also link parameters directly from the Simulation PropertyManagers. Use the parameterized Simulation features in design studies to perform optimization or evaluate specific scenarios of your design.

You can link these Simulation features to parameters:
  • Structural and thermal loads (force, pressure, temperature, heat power, etc.)
  • Connector, fixture, and contact set properties (shank diameter, spring stiffness, translations, etc.)
  • Mesh parameters (maximum, minimum element size, etc.)
  • Material properties of custom-defined materials
  • Shell thickness and composite shell parameters (thickness and angle)
    All features that can be linked to parameters, show the Link value option when clicking the down arrow in their input fields.
  1. Open the PropertyManager of the Simulation feature you want to link to a parameter.
  2. Click the down arrow PM_down_arrow.gif in the feature's entry field and select Link value. (For custom-defined material properties, select Link parameter).
  3. (Optional) In the Select Parameter dialog box, if the parameter you want to link does not exist, do the following:
    1. Click Edit/define.
    2. In the Parameters dialog box, under Name, type the parameter's name.
    3. Under Category, select Simulation.
    4. In the Value field, enter a numeric value and select the desired units.

      You can also enter an expression to define the parameter. You can use a combination of operators, mathematical functions, constants or previously defined parameters to define an expression. Make sure that the units of each term are compatible with the parameter being defined.

    5. Click OK.
  4. In the Select Parameter dialog box, from the list of available parameters, select the parameter, and click OK.

    The background color of the entry field becomes blue to show that the feature is now linked to the selected parameter.

To dis-associate a feature from a parameter, click the down arrow PM_down_arrow.gif in the entry field, and click Unlink value.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Linking a Simulation Feature to a Parameter (Second Workflow)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.