Hide Table of Contents

AssemblyXpert

The AssemblyXpert analyzes performance of assemblies and suggests possible actions you can take to improve performance. This is useful when you work with large and complex assemblies. In some cases, you can select to have the software make changes to your assembly to improve performance.

Although the conditions identified by AssemblyXpert can degrade assembly performance, they are not errors. It is important that you weigh recommendations of the AssemblyXpert against your design intent. In some cases, implementing the recommendation would improve assembly performance, but would compromise your design intent.

To run the AssemblyXpert:

  1. Click AssemblyXpert (Assembly toolbar) or Tools > AssemblyXpert.

    In the AssemblyXpert dialog box, the following icons indicate the status of each diagnostic test. Additionally, statistics about the components and mates in the assembly are displayed.

    Icon Status Action
    Passed No further action is required.
    Warning Review the information and make changes if appropriate for your assembly.
    Information only No further action is required.

  2. Depending on the test and its status, you can click the following tools:

    Tool Name Description
    Show these Parts Lists affected components.
    Turn on Large Assembly Mode Activates Large Assembly Mode and updates the AssemblyXpert.
    Analyze and Fix Changes the assembly to fix the problem.
      More Information Displays a help topic.

  3. Click OK to close the AssemblyXpert.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   AssemblyXpert
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.