Hide Table of Contents

Tooling Split PropertyManager

You can insert a tooling split to create the core and cavity blocks for a mold.

To create a tooling split, the part must have at least three surface bodies in the Surface Bodies folder: a core surface body, a cavity surface body, and a parting surface body. You can create a mold from a tooling split for multiple parts, or for multiple instances of the same part.

To help prevent the core and cavity blocks from shifting, you can add an interlock surface along the perimeter of parting surfaces prior to inserting a tooling split in a mold part. You can also create the interlock surface automatically when you insert the tooling split. To close holes in a molded part, you can add shut off surfaces.
If you do not include the surface bodies with the mold part in advance, you can include a collection of separate surfaces that the tooling split command can automatically knit together.

To open the Tooling Split PropertyManager, do one of the following:

  • Click Tooling Split (Mold Tools toolbar).
  • Click Insert > Molds > Tooling Split.
  • Right-click a Tooling Split feature and click Edit Feature fm_edit_feature.gif.

Block Size

dim_lin_d.png Depth in Direction 1 Specifies the depth of the split on the mold core.
dim_lin_d.png Depth in Direction 2 Specifies the depth of the split on the mold cavity.
  Interlock Surface Automatically creates an interlock surface for the split mold.
Draft Angle Specifies the draft angle for the interlock surface.

Core

surface.png Core Surface Bodies Displays and highlights the selected surfaces that define the mold core.

molds_toolsplit_simjplemodle_core.gif

Cavity

surface.png Cavity Surface Bodies Displays and highlights the selected surfaces that define the mold cavity.

molds_toolsplit_simplemodel_cavity.gif

Parting Surface

surface.png Parting Surface Bodies Displays and highlights the selected surfaces that define the mold split parting surface.

molds_toolssplit_simplemodel_partingsurface.gif

Mold After Tooling Split
molds_toolsplit_model_beforeeditsimple.gif


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Tooling Split PropertyManager
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.