Hide Table of Contents

Print Selection

To specify an area of the drawing sheet to print:

  1. In a drawing, click File > Print.
  2. In the dialog box, under Print range, choose Selection, then click OK.

    The Print Selection dialog box appears, and a selection frame appears on the drawing sheet. The frame reflects the current printer settings (such as page size, and orientation) as defined in the Page Setup dialog box.

  3. Select a scale factor to apply to the selected area:
    Option Description
    Model scale (1:1) The selected area is printed at actual size; a model dimension of 100mm is printed at 100mm. The default sheet scale is used to calculate the correct print size; for areas that use a scale different from the default sheet scale, you might need to use a custom scale.
    Sheet scale (1:1) The selected area is printed as it appears on the full sheet. If the drawing size and the paper size are the same, the entire sheet is printed. Otherwise, only the selected area is printed.
    Custom scale The selected area is printed at a scale factor you specify. Type a scale, then click Apply scale.

    Custom Scale Examples

  4. Drag the selection frame to position it. You can pan or zoom the view.

    The pointer changes to pointer4print.gif as you position the selection frame.

  5. Click OK to print the selected area.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Print Selection
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.