Hide Table of Contents

Creating a Design Study

You use a similar workflow to create evaluation studies and optimization studies.

Prerequisites
  • If you plan to use simulation data sensors, you must create at least one initial simulation study before creating the design study. (Not available in SolidWorks Standard and SolidWorks Professional.)
  • Optionally, you can define:
    • Parameters to use as variables. Click Insert > Design Study > Parameters.
    • Sensors to use as constraints and goals. In the FeatureManager design tree, right-click the Sensors folder and select Add Sensor.
    You can also define parameters and sensors during the study from the Design Study tab.

To create a design study:

  1. Do one of the following:
    • Click Design Study (Tools toolbar).
    • Click Insert > Design Study > Add.
    • Right-click an existing Design Study tab and click Create New Design Study.

    A Design Study tab appears at the bottom of the graphics area.

  2. To set properties such as study quality and results folder, click Design Study Options .
  3. Define variables using parameters.
  4. Define constraints using sensors.
  5. For Optimization studies, define goals using sensors.
  6. Do one of the following:
    • For Evaluation studies, clear Optimization.
    • For Optimization studies, select Optimization.
  7. Click Run.

    The results of the study appear on the Results View tab.

    Select a scenario or iteration on the Results View tab. In the graphics area, the model updates with the values for that scenario or iteration.

  8. Right-click Results and Graphs and click one:

    Purge Results

    Deletes the results but keeps the definition of the study.

    Define Design History Graph

    Plot a 2D graph of a design variable, objective (goal), or constraint with respect to the scenario number if you defined only discrete variables.

    Define Local Trend Graph

    Plot a 2D graph of an objective (goal) or a constraint with respect to a design variable. The plot is not available if you use the High Quality option for study quality and you define discrete variables only.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Creating a Design Study
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.