Hide Table of Contents

Designating a Part as a Fastener

A custom property named IsFastener, with its value set to 1, designates a part as a fastener for interference detection.

To designate a part as a fastener for interference detection:

  1. In the part document, click File > Properties , and select the Custom tab.
  2. In the first blank cell under Property Name, choose IsFastener from the list.
  3. Select Number in Type.
  4. Under Value / Text Expression, type 1.
  5. Press Tab or Enter.

    The value 1 appears under Evaluated Value.

  6. Click OK.

    The part now has a custom property IsFastener with a value of 1. Now when you run Interference Detection (with Create fasteners folder selected), if the part is involved in an interference, the interference appears in the Fasteners folder.

    By default, fasteners provided with the SolidWorks Toolbox add-in are designated as fasteners for interference detection (they have a custom property named IsFastener, with its value set to 1).



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Designating a Part as a Fastener
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.48