Hide Table of Contents

Forming a New Assembly from Existing Components

You can form a subassembly from components that are already in the assembly, thereby moving the components down one level in the assembly hierarchy.

Before creating a new subassembly, you can specify the default behavior for saving it, either as a separate external assembly file or as a virtual component within the parent assembly file. Click Tools > Options > System Options > Assemblies and select or clear Save new components to external files.
Recommendation: Position and mate at least one of the components before you begin, then select that component first.

To form a new assembly from existing components:

  1. Ctrl + select the components (individual parts or subassemblies) that you want to group into a subassembly. All the components must be at the same level within a single parent assembly.
  2. Do one of the following:
    • Right-click one of the selected components, and select Form New Subassembly.
    • Click Insert > Component > Assembly from [Selected] Components.

    Depending on your Assemblies option setting, one of the following occurs:

    • The new subassembly is saved as a virtual component within the parent assembly.
    • The Save As dialog box appears, so you can save the new subassembly in its own assembly document. Browse to a different folder if needed, enter a File name, and click Save.

    A new subassembly is inserted at the level where the selected components were located, and the components are moved into the new subassembly.

Example

In this example, assembly A contains components P1 and P2.

P1 and P2 are selected to form a new subassembly, S1.

Instead of referencing the individual component documents P1 and P2, assembly A now references the subassembly document S1.

Any mates that exist between components P1 and P2 move from the Mates folder of assembly A to the Mates folder of subassembly S1.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Forming a New Assembly from Existing Components
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.