The Last Part is the last part through which the Hole Series passes. The Last Part contains the tap, or the bottom of the hole if it is a blind hole.
To open the Hole Series (Last Part) PropertyManager:
Click Hole Series 
(Features toolbar) or .
End Hole Specification
 Clearance Hole
|
 Tap
|
| Auto size based on start hole |
Sets the diameter for the middle parts by choosing the closest available hole size to the diameter of the first part. The available hole sizes depend on the selected screw type. If you change the Size (First Part) PropertyManager, Start Hole Specification), the middle parts automatically update to match. Clear this option to set Custom Sizing.
|
| Type |
Select a drill type or screw clearance. |
| Size |
Select a size for the fastener. |
| Fit |
Select a fit for the fastener: Close, Normal, or Loose. |
End Component
 |
Component List |
Select an end component of the hole series.
|
End Condition
The End Condition options vary depending on the hole type. Use the PropertyManager images and descriptive text to set the options.
- Select an end condition from the list: Blind, Through All, Up to Surface, Offset from Surface. Set other end condition options depending on the condition and hole type.
 |
Blind is the distance measured from the first face intersected by the hole axis in the last component. |
- (For Tap ). Set the thread depth and type. Select one of the following thread options:
Options
| Far side countersink |
Sets values for diameter and angle. |
Custom Sizing
Sizing options vary depending on the hole type. Use the PropertyManager images and descriptive text to set the options such as diameter, depth, and angle.
You can override the value in the boxes. To revert to the default values, click Restore Default Values. The background color of the boxes is white for the default value, and yellow for the override value.