Hide Table of Contents

Core PropertyManager

To open the Core PropertyManager:

  1. Create a core sketch on a tooling body (main core or cavity).
  2. Click Core Tool_Core_Mold_Tools.gif on the Mold Tools toolbar, or click Insert > Molds > Core.

Selections

PM_sketch_to_project.gif Bounding sketch for core Displays the name of the selected core sketch.
  Extraction direction Select an entity in the graphics area to define the extraction direction. The default direction is normal to the sketch plane. If necessary, click Reverse Direction PM_reverse_direction.gif to extract the core in the opposite direction.
In the graphics area, the single-headed arrow indicates the extraction direction:
Extraction direction extraction_direction.gif Away from extraction direction
solid_bodies.png Core/Cavity body Displays the name of the tooling body from which the core is extracted.

Parameters

PM_draft_on_off.gif Draft On/Off Adds draft to the core. Set Draft Angle.
  Draft outward Creates an outward draft angle. If cleared, an inward draft angle is created.
  End Condition Select the end condition in the extraction direction. If you select Blind, then set Depth along extraction direction PM_distance_nonum.gif.
  End Condition Select the end condition away from the extraction direction. If you select Blind, then set Depth away from extraction direction PM_distance_nonum.gif.
  Cap ends Select to define the end surface of the core, if the core ends within the tooling body.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Core PropertyManager
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:

x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2014 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.48