Hide Table of Contents

Discrete DimXpert Feature Types

Discrete DimXpert feature types build upon DimXpert features.

Discrete Feature Type Definition Supported Features Example
Collection A group of two or more manufacturing features. All

The features making up the periphery of the part are combined into a collection feature.

Collections are most useful when you need to apply a surface profile tolerance simultaneously to a set of features or faces.

Compound Cylinder A set of coaxial cylinders having the same radius. For example, the two cylindrical faces at the top of this part. Cylinder
Compound Hole A set of coaxial holes having the same diameter. For example, the two internal cylindrical faces split by a groove in this part. Simple hole
Discrete Feature Type Definition Supported Features Example
Pattern A group of DimXpert features having the same type (hole, slot, notch, etc.) and size parameters.

They are generally associated with common dimensions and tolerances. For example, applying a diameter dimension and geometric position tolerance to a pattern of holes.

  • Chamfer
  • Counterbore hole
  • Countersink hole
  • Cylinder
  • Fillet
  • Notch
  • Simple Hole
  • Slot


Simple hole, counterbore, slot, and notch pattern features
Linked Pattern A DimXpert pattern that is based on and maintains an association with a SW modeling feature or features.

DimXpert pattern features linked to modeling features update automatically if you change the modeling features.

Linked patterns are identified in the DimXpertManager by the link icon .

Slot Pattern1 is a linked pattern and Slot Pattern2 is not.



Supported modeling features:
  • Chamfer
  • Circular Pattern
  • Extruded Cut
  • Fillet
  • Hole Wizard
  • Linear Pattern
  • Mirror
  • Simple Hole


Given the four small holes on the part above, here are examples of what would and would not result in a linked pattern.

Linked:

  • Four holes modeled as a single hole wizard or simple hole feature
  • Four holes modeled using a single cut extrude, whose sketch contains only the 4 circles
  • A single hole wizard or simple hole feature followed by a linear or circular pattern

Not Linked:

  • Part is an imported body
  • Complete part is modeled using a single sketch and extrude feature


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Discrete DimXpert Feature Types
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.