Hide Table of Contents

Copy Mesh and Generate Report Example (VB.NET)

This example shows how to copy the mesh from one study to another and generate a report.

'----------------------------------------------------------------------------
' Preconditions: 
' 1. Add the SOLIDWORKS Simulation as an add-in
'    (in SOLIDWORKS, click Tools > Add-ins > SOLIDWORKS Simulation).
' 2. Add the SOLIDWORKS Simulation primary interop assembly as
'    a reference (in the IDE's Project Explorer, right-click
'    the project name, click Add Reference, click the Browse tab,
'    navigate to install_dir\api\redist\CLR2,
'    click SolidWorks.Interop.cosworks.dll, and click OK).

' 3. Open install_dir\Simulation\Examples\Verification\buckling2.sldprt.

'
' Postconditions:
' 1. Meshes the Quality and Draft studies.
' 2. Copies the mesh from the Quality study to the Draft study.
' 3. Click OK to close any dialog boxes.
' 4. Generates a report for the Draft study in c:\temp.
'
' NOTE: Because the model is used elsewhere, do not save changes.
' ---------------------------------------------------------------------------
Imports SolidWorks.Interop.sldworks
Imports SolidWorks.Interop.swconst
Imports SolidWorks.Interop.cosworks
Imports System.Runtime.InteropServices
Imports System
 
Partial Class SolidWorksMacro
 
 
    Sub main()
 
        Dim COSMOSWORKS As COSMOSWORKS
        Dim CWAddinCallBack As CWAddinCallBack
        Dim ActDoc As CWModelDoc
        Dim StudyMngr As CWStudyManager
        Dim Study As CWStudy
        Dim CWMesh As CWMesh
 
        Dim errCode As Integer, n As Integer
        Dim el As Double, tl As Double
 
        Const NoOfElements1 As Double = 712
        Const NoOfElements2 As Double = 2686
 
        CWAddinCallBack = swApp.GetAddInObject("CosmosWorks.CosmosWorks")
        If CWAddinCallBack Is Nothing Then ErrorMsg(swApp, "No CWAddinCallBack object"True)
        COSMOSWORKS = CWAddinCallBack.COSMOSWORKS
        If COSMOSWORKS Is Nothing Then ErrorMsg(swApp, "No CosmosWorks object"True)
 
        'Get active document
        ActDoc = COSMOSWORKS.ActiveDoc()
        If ActDoc Is Nothing Then ErrorMsg(swApp, "No active document"True)
 
        'Get the first study
        StudyMngr = ActDoc.StudyManager()
        If StudyMngr Is Nothing Then ErrorMsg(swApp, "No study manager object"True)
        StudyMngr.ActiveStudy = 0
        Study = StudyMngr.GetStudy(0)
        If Study Is Nothing Then ErrorMsg(swApp, "No study object"True)
 
        'Mesh the first study
        CWMesh = Study.Mesh
        If CWMesh Is Nothing Then ErrorMsg(swApp, "No mesh object"False)
        CWMesh.Quality = 1
        Call CWMesh.GetDefaultElementSizeAndTolerance(0, el, tl)
        errCode = Study.CreateMesh(0, el, tl)
        If errCode <> 0 Then ErrorMsg(swApp, "Mesh failed"True)
 
        n = CWMesh.NodeCount
 
        If (n < 0.95 * NoOfElements2) Or (n > 1.05 * NoOfElements2) Then
            ErrorMsg(swApp, " % error = " & (((n - NoOfElements2) / NoOfElements2) * 100), False)
        End If
 
        'Get the second study
        StudyMngr.ActiveStudy = 1
        Study = StudyMngr.GetStudy(1)
        If Study Is Nothing Then ErrorMsg(swApp, "No study object"True)
 
        'Mesh the second study
        CWMesh = Study.Mesh
        If CWMesh Is Nothing Then ErrorMsg(swApp, "No mesh object"False)
        CWMesh.Quality = 0
        Call CWMesh.GetDefaultElementSizeAndTolerance(0, el, tl)
        errCode = Study.CreateMesh(0, el, tl)
        If errCode <> 0 Then ErrorMsg(swApp, "Mesh failed"True)
 
        n = CWMesh.NodeCount
        If (n < 0.95 * NoOfElements1) Or (n > 1.05 * NoOfElements1) Then
            ErrorMsg(swApp, " % error = " & (((n - NoOfElements1) / NoOfElements1) * 100), False)
        End If
 
        'Copy mesh from the first study to the second study
        errCode = Study.CopyMeshFromStudy("Quality")
        If errCode <> 0 Then ErrorMsg(swApp, "Mesh failed to copy"True)
 
        n = CWMesh.NodeCount
        If (n < 0.95 * NoOfElements2) Or (n > 1.05 * NoOfElements2) Then
            ErrorMsg(swApp, " % error = " & (((n - NoOfElements2) / NoOfElements2) * 100), False)
        End If
 
        'Generate Report
        errCode = Study.GenerateReport("C:\temp""report", 0)
        If errCode <> 1 Then ErrorMsg(swApp, "Failed to generate report"True)
 
    End Sub
 
    Sub ErrorMsg(ByVal SwApp As SldWorks, ByVal Message As StringByVal EndTest As Boolean)
        SwApp.SendMsgToUser2(Message, 0, 0)
        SwApp.RecordLine("'*** WARNING - General")
        SwApp.RecordLine("'*** " & Message)
        SwApp.RecordLine("")
    End Sub
 
    ''' <summary>
    ''' The SldWorks swApp variable is pre-assigned for you.
    ''' </summary>
    Public swApp As SldWorks
 
 
End Class
 

 



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Copy Mesh and Generate Report Example (VB.NET)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.