Hide Table of Contents

Material Dialog Box - Appearance Tab

Use the Appearance tab to associate a new color or texture with the selected material. Changing the appearance affects the visual presentation only, not the physical properties of the part.

To display this dialog box:

Open a part, right-click Material in the FeatureManager design tree, and select Edit Material.

Apply appearance of Material-name Applies the visual and physical properties of the selected material. When cleared, applies the physical properties only.
When cleared, this option remains cleared for each additional material you apply, unless re-selected.
Appearance tree On the left side of the tab, select an appearance from the tree. The default preview of the appearance appears in the lower right of the tab.

Available when the selected material is in a custom library.

Custom color controls Specify a new color to apply to the appearance. Changes the primary color of the selected appearance.
  • From the list, select the type of swatch: dull, shiny, standard, transparent, or a custom swatch defined in the Appearances PropertyManager.
  • Select a new color from the color picker.

The swatch at the top right of the tab displays the color that will be used when you click Apply.

Available when the selected material is in a custom library.

Use custom material optical properties Uses the optical properties of the selected color. When cleared, uses the optical properties of the appearance.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Material Dialog Box - Appearance Tab
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.