Hide Table of Contents

2D to 3D Conversion Overview

You can convert 2D sketches into 3D models.

The 2D sketch can be an imported drawing, or it can be a sketch constructed in SOLIDWORKS. In either case, it must be a single sketch in a part document.

Even though the sketch can be an imported drawing, it must be imported into a sketch in a part document. You can copy and paste the drawing from a drawing document, or you can import the drawing directly into a 2D sketch in a part document.

The conversion procedure is generally as follows:

  1. In a part document, import a drawing into a sketch or construct a new sketch.
  2. Edit the sketch.
  3. Extract sketches for views from the Front, Top, and so on. The sketches fold up into the appropriate orientation.
  4. Align the sketches.
  5. Extrude the base feature.
  6. Cut or extrude other features.

The tools for the conversion process are on the 2D to 3D Toolbar.





Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   2D to 3D Conversion Overview
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.