Hide Table of Contents

Suppress and Unsuppress Features

When you suppress a feature, it is removed from the model (but not deleted). The feature disappears from the model view and is shown in gray in the FeatureManager design tree. If the feature has child features, the child features are also suppressed.

Suppressing Features

To suppress a feature:

  1. Select the feature in the FeatureManager design tree, or select a face of the feature in the graphics area. To select multiple features, hold down Ctrl as you select.
  2. Do one of the following:
    • Click Suppress on the Features toolbar. (In parts with multiple configurations, applies to only the current configuration.)
    • Click Edit > Suppress, then select This Configuration, All Configurations, or Selected Configurations.

    You can also right-click a feature in the FeatureManager design tree and do one of the following to suppress the selected feature and its child features:

    • Select Suppress. (In parts with multiple configurations, applies to only the current configuration.)
    • Select Properties, then in the dialog box, select Suppressed. In parts with multiple configurations, select This Configuration, All Configurations, or Selected Configurations.

Unsuppressing Features

When you unsuppress a feature, it is returned to the model. If the feature has child features, you can select whether or not to unsuppress the child features when you unsuppress the parent feature. If you want to unsuppress a suppressed feature, you must select it in the FeatureManager design tree.

To unsuppress a feature:

  1. Select the suppressed feature in the FeatureManager design tree.
  2. Do one of the following:
    • Click Unsuppress on the Features toolbar. (In parts with multiple configurations, applies to only the current configuration.)
    • Click Edit > Unsuppress, then select This Configuration, All Configurations, or Selected Configurations.

    You can also right-click a feature in the FeatureManager design tree and do one of the following to unsuppress the selected feature:

    • Select Unsuppress. (In parts with multiple configurations, applies to only the current configuration.)
    • Select Properties, then in the dialog box, clear Suppressed. In parts with multiple configurations, select This Configuration, All Configurations, or Selected Configurations.

    If the selected feature is the child of another feature, the parent feature is also unsuppressed.

Unsuppressing Features and Dependents

To unsuppress a feature and its dependents:

  1. Select the suppressed parent feature in the FeatureManager design tree.
  2. Do one of the following:
    • Click Unsuppress with Dependents on the Features toolbar. (In parts with multiple configurations, applies to only the current configuration.)
    • Click Edit > Unsuppress with Dependents, then select This Configuration, All Configurations, or Selected Configurations.

    The selected feature and any features that are dependent on it are returned to the model.

    If you unsuppress a child feature, its parent feature is also unsuppressed. However, if the parent feature has other child features, they remain suppressed.



Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Suppress and Unsuppress Features
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:




x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.