Hide Table of Contents

Creating a Joined Part

In an assembly, you can join two or more parts to create a new part. The join operation removes surfaces that intrude into each other's space, and merges the part bodies into a single solid volume.

To join parts:

  1. Create the parts that you want to join, then create an assembly containing the parts.
  2. Position the parts as desired in the assembly. The parts may either touch each other or intrude into one another.

  3. Save the assembly but do not close the window.

  4. Insert a new part into the assembly:
    1. Click New Part on the Assembly toolbar, or click Insert > Component > New Part.
    2. Click a plane or planar face on a component.

    In the new part, a sketch opens on the selected plane.

  5. Close the sketch. Because you are creating a joined part, you do not need the sketch.
  6. In the FeatureManager design tree, right-click the new part name, select Rename Part, and rename the new part.
  7. Click Insert > Features > Join.
  8. Make selections and set options in the Join PropertyManager.
  9. Click to create the joined part.

    Before join - coincident faces After Join - faces are removed

  10. To return to editing the assembly, right-click the assembly name in the FeatureManager design tree, or right-click anywhere in the graphics area, and select Edit Assembly:<assembly_name>, or click Edit Component on the Assembly toolbar.
The new component, Part1, appears in the FeatureManager Design Tree. The part contains the Join feature, Join1.
The joined part is fully associative to the original parts and to the assembly. Any changes made to the original parts are reflected in the joined part. If the parts move relative to each other in the assembly, the joined part changes also.


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Creating a Joined Part
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.