Hide Table of Contents
InsertGussetFeature3 Method (IFeatureManager)

Inserts a gusset feature for pre-selected faces of a weldment.

.NET Syntax

Visual Basic (Declaration) 
Function InsertGussetFeature3( _
   ByVal Depth As System.Double, _
   ByVal DirType As System.Short, _
   ByVal LocType As System.Short, _
   ByVal BIsProfile As System.Boolean, _
   ByVal ProfileD1 As System.Double, _
   ByVal ProfileD2 As System.Double, _
   ByVal ProfileD3 As System.Double, _
   ByVal ProfileAngle As System.Double, _
   ByVal ProfileD4 As System.Double, _
   ByVal BOffset As System.Boolean, _
   ByVal DProfileOffset As System.Double, _
   ByVal CrvIndex As System.Integer, _
   ByVal BReverseDir As System.Boolean, _
   ByVal BReverseFace As System.Boolean, _
   ByVal BUseLenDim As System.Boolean, _
   ByVal ProfileD5 As System.Double, _
   ByVal ProfileD6 As System.Double, _
   ByVal ProfileChamferAngle As System.Double, _
   ByVal BUseLenDimForChamfer As System.Boolean, _
   ByVal BNeedChamferInGusset As System.Boolean _
) As Feature
Visual Basic (Usage) 
Dim instance As IFeatureManager
Dim Depth As System.Double
Dim DirType As System.Short
Dim LocType As System.Short
Dim BIsProfile As System.Boolean
Dim ProfileD1 As System.Double
Dim ProfileD2 As System.Double
Dim ProfileD3 As System.Double
Dim ProfileAngle As System.Double
Dim ProfileD4 As System.Double
Dim BOffset As System.Boolean
Dim DProfileOffset As System.Double
Dim CrvIndex As System.Integer
Dim BReverseDir As System.Boolean
Dim BReverseFace As System.Boolean
Dim BUseLenDim As System.Boolean
Dim ProfileD5 As System.Double
Dim ProfileD6 As System.Double
Dim ProfileChamferAngle As System.Double
Dim BUseLenDimForChamfer As System.Boolean
Dim BNeedChamferInGusset As System.Boolean
Dim value As Feature
 
value = instance.InsertGussetFeature3(Depth, DirType, LocType, BIsProfile, ProfileD1, ProfileD2, ProfileD3, ProfileAngle, ProfileD4, BOffset, DProfileOffset, CrvIndex, BReverseDir, BReverseFace, BUseLenDim, ProfileD5, ProfileD6, ProfileChamferAngle, BUseLenDimForChamfer, BNeedChamferInGusset)
C# 
Feature InsertGussetFeature3( 
   System.double Depth,
   System.short DirType,
   System.short LocType,
   System.bool BIsProfile,
   System.double ProfileD1,
   System.double ProfileD2,
   System.double ProfileD3,
   System.double ProfileAngle,
   System.double ProfileD4,
   System.bool BOffset,
   System.double DProfileOffset,
   System.int CrvIndex,
   System.bool BReverseDir,
   System.bool BReverseFace,
   System.bool BUseLenDim,
   System.double ProfileD5,
   System.double ProfileD6,
   System.double ProfileChamferAngle,
   System.bool BUseLenDimForChamfer,
   System.bool BNeedChamferInGusset
)
C++/CLI 
Feature^ InsertGussetFeature3( 
&   System.double Depth,
&   System.short DirType,
&   System.short LocType,
&   System.bool BIsProfile,
&   System.double ProfileD1,
&   System.double ProfileD2,
&   System.double ProfileD3,
&   System.double ProfileAngle,
&   System.double ProfileD4,
&   System.bool BOffset,
&   System.double DProfileOffset,
&   System.int CrvIndex,
&   System.bool BReverseDir,
&   System.bool BReverseFace,
&   System.bool BUseLenDim,
&   System.double ProfileD5,
&   System.double ProfileD6,
&   System.double ProfileChamferAngle,
&   System.bool BUseLenDimForChamfer,
&   System.bool BNeedChamferInGusset
) 

Parameters

Depth
Thickness of the gusset
DirType

Thickness direction of the gusset as defined in swGussetThicknessType_e

LocType

Location of the reference plane for the sketch of the gusset as defined in swGussetProfileLocationType_e

BIsProfile
True to use a polygon profile, false to use a triangle profile
ProfileD1
Profile Distance1 (see Remarks)
ProfileD2
Profile Distance2 (see Remarks)
ProfileD3
Profile Distance3 (see Remarks)
ProfileAngle
Profile Angle (see Remarks); valid only if BUseLenDim is false
ProfileD4
Profile Distance4 (see Remarks); valid only if BUseLenDim is true
BOffset
True to offset the reference plane for the sketch, false to not
DProfileOffset
Value by which to offset the reference plane for the sketch
CrvIndex
Index of the edge to use if multiple intersecting edges exist
BReverseDir
If BOffset set to true, then true to reverse direction, false to not
BReverseFace

Reverse ProfileD1 and ProfileD2 if triangle profile

- or -

Reverse ProfileD1 and ProfileD2 and reverse ProfileD3 and ProfileD4 if polygon profile

BUseLenDim
True to use ProfileD4, false to use ProfileAngle
ProfileD5
Chamfer Distance5 (see Remarks); valid only if BNeedChamferInGusset is true
ProfileD6
Chamfer Distance6 (see Remarks); valid only if BNeedChamferInGusset and BUseLenDimForChamber are both true
ProfileChamferAngle
Chamfer Angle (see Remarks); valid only if BUseLenDimForChamfer is false and BNeedChamferInGusset is true
BUseLenDimForChamfer
True to use ProfileD6, false to use ProfileChamferAngle; valid only if BNeedChamferInGusset is true
BNeedChamferInGusset
True to create a chamfer to allow room for a weld bead under the gusset, false to not

Return Value

IFeature

Example

Remarks

See the SOLIDWORKS Help for more information about profile and chamfer distances and angles in weldment gussets. 

Before calling this method, you must call IModelDocExtension::SelectByID2 to select two faces that are the supporting legs of this gusset.

Instead of using this method, you can pass an array of faces to IFeatureManager::InsertGussetFeature2.

 

See Also

Availability

SOLIDWORKS 2015 FCS, Revision Number 23.0


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   InsertGussetFeature3 Method (IFeatureManager)
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:



x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: API Help (English only) 2015 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.