Hide Table of Contents

Plane PropertyManager

You select geometry and apply constraints to the geometry to define reference planes.

To display this PropertyManager:

Click Plane (Reference Geometry toolbar).

Message

Follow the messages to create a plane and see the plane status. The Message box color, plane color, and PropertyManager messages help guide your selections. The plane status must be Fully defined to create the plane.

First Reference

First Reference select_edge_faces_vertex.png Select the first reference to define the plane. Based on your selection, other constraint types appear.
Coincident coincident.png Button Creates a plane that passes through the selected reference.
Parallel parallel.png Button Creates a plane parallel to the selected plane. For example, select a face for one reference and a point for another reference. The software creates a plane that is parallel to the face and coincident to the point.
Perpendicular perpendicular.png Button Creates a plane perpendicular to the selected reference. For example, select an edge or curve for one reference and a point or vertex for another reference. The plane is created perpendicular to the curve passing through the point. Set origin on curve places the origin of the plane on the curve. When cleared, the origin is placed on the vertex or point.
Project Projects a singular entity such as a point, vertex, origin, or coordinate system onto a non-planar surface.
Parallel to screen Creates a plane at the selected vertex that is parallel to the current view orientation.
Tangent tangent.png Button Creates a plane tangent to cylindrical, conical, non-cylindrical, and non-planar faces.
At angle dim_ang.png Button Creates a plane through an edge, axis, or sketch line at an angle to a cylindrical face or plane. You can specify the Number of planes to create pattern_linear_count.png.
Offset distance Creates a plane parallel to a plane or face, offset by a specified distance. You can specify the Number of planes to create pattern_linear_count.png.
Flip Normal FlipNormal Flips the normal vector of the plane.
Mid Plane Creates a mid plane between planar faces, reference planes, and 3D sketch planes. Select Mid Plane for both references.

Second Reference and Third Reference

These sections contain the same options as First Reference, depending on your selections and model geometry. Set these references as needed to create the desired plane.

Examples

Parallel  
Perpendicular  




Set origin on curve selected

Set origin on curve cleared
Project  
Select the sketch point and the model surface. Two options appear in the PropertyManager: Nearest location on surface and Along sketch normal.




Nearest location on surface selected. The new plane is created at the point on the surface closest to the selected sketch point.

Along sketch normal selected. The new plane is created at the point on the surface obtained by projecting the sketch point normal to the plane on which the sketch point is located. Select Flip if the plane preview does not appear.
Tangent  


Select a surface and a sketch point on the surface. The plane is created tangent to the surface and coincident to the sketch point.
At angle

Select a plane or planar face and select an edge, axis, or sketch line. Enter the angle.

  


If the selected line is in the same plane as the selected plane, the new plane rotates around the selected line.

If the selected line is parallel to the selected plane, the new plane moves to the parallel line and rotates around the line.


Multiple planes created at an angle to the selected face.


Select the cylinder's axis and apply a coincident constraint. Select the lower plane as another reference with an At Angle constraint of 30º. The new plane is created coincident to the cylinder's axis at a 30º angle to the lower plane.
Offset distance  


Single offset plane

Multiple offset planes
Mid Plane  
 


Provide feedback on this topic

SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team. The documentation team cannot answer technical support questions. Click here for information about technical support.

* Required

 
*Email:  
Subject:   Feedback on Help Topics
Page:   Plane PropertyManager
*Comment:  
*   I acknowledge I have read and I hereby accept the privacy policy under which my Personal Data will be used by Dassault Systèmes

Print Topic

Select the scope of content to print:
x

We have detected you are using a browser version older than Internet Explorer 7. For optimized display, we suggest upgrading your browser to Internet Explorer 7 or newer.

 Never show this message again
x

Web Help Content Version: SOLIDWORKS 2016 SP05

To disable Web help from within SOLIDWORKS and use local help instead, click Help > Use SOLIDWORKS Web Help.

To report problems encountered with the Web help interface and search, contact your local support representative. To provide feedback on individual help topics, use the “Feedback on this topic” link on the individual topic page.

0.20.59