You can specify document-level drafting settings for angle dimensions. Available for all document types.
To open this page:
With a drawing open, click
Options 
(Standard toolbar), select Document Properties, and then select .
Overall drafting standard
| Overall drafting standard
|
Inherited from the selected Drafting Standard page settings. |
Base angle dimension standard
| Base angle dimension standard
|
- ANSI
- ISO
- DIN
- JIS
- BSI
- GOST
- GB
|
Leader/Dimension line style
 Leader Style
|
Select: a style. |
 Leader Thickness
|
Select: a thickness or select Custom Size and enter a thickness. |
Extension line style
| Extension Line Style
|
Select: a style. |
| Extension Line Thickness
|
Select: a thickness or select Custom Size and enter a thickness. |
| Same as leader/dimension line style |
Select to maintain line style. |
Text
| Font
|
Click to modify the font.
|
| Horizontal
text justification |
Left |
| Center |
| Right |
| Vertical
text justification |
Top |
| Middle |
| Bottom |
Precision
 Unit Precision
|
Select the number of digits included after the decimal point for the value. |
 Tolerance Precision |
Select the number of digits included after the decimal point for the tolerance.
|
Layer
| Layer
|
Select a layer. You must first create layers for the drawing before you can select them for document properties.
|
You must select Per Standard for Layer (Layer toolbar) in the drawing view document to apply these layer settings.
Text position
| Solid Leader, Aligned Text |
 |
 |
| Broken Leader, Horizontal Text |
 |
 |
| Broken Leader, Aligned Text |
 |
 |
Leader display
| Use bent leaders |
Moves text away from extension lines (ANSI only). Select to use bent leaders with the dimension. |
 |
Options
| Tolerance |
Click to set the tolerance.
|
| Remove units with 0 value for deg/min and deg/min/sec |
Select to hide units that have a value of zero, for example, when selected, 73º0'37" displays as 73º37".
|