Measures distance, angle, radius, and size of and between lines, points, surfaces, and planes in sketches, 3D models, assemblies, or drawings.
To open the Measure dialog box:
Click Measure 
(Tools toolbar) or .
When you select a vertex or sketch point, the x, y, and z coordinates are displayed.
When the Measure tool is not active, commonly-used measurements for selected entities appear in the status bar.
 |
Arc/Circle Measurements |
Select to specify the distance to display when arcs or circles are selected:
|
 Center to Center
|
|
|
 Minimum Distance
|
|
|
 Maximum Distance
|
|
|
 Custom Distance
|
|
|
 |
Units/Precision |
Select to specify custom measurement units and precision.
|
 |
Show XYZ Measurements |
Select to display dX, dY, and dZ measurements between selected entities in the graphics area. Clear to display only the minimum distance between selected entities.
|
 |
Point-to-Point |
Enables point-to-point mode to measure the distance between any two points on the model. |
 |
XYZ Relative To |
Select a coordinate system:
|
 Part Origin
|
|
|
 Coordinate System instance
|
User-defined coordinate system.
|
This option is available only when the current document has more than one coordinate system available. |
 |
Projected On |
Display the distance between selected entities as projected on one of the following:
|
 None
|
Projection and Normal are not calculated.
|
|
 Screen
|
|
|
 Select Face/Plane
|
The software calculates the projected distance (on the plane you select), and the normal distance (normal to the plane you select). Projection and Normal appear in the Measure dialog box.
|
In Detached drawings, if the model is not loaded, all measurements are reported as 2D projected data.
|
 |
Measurement History |
Opens the Measurement History dialog box, where you can view all measurements made during the current session of SOLIDWORKS. |
 |
Create Sensor |
Opens the Sensor PropertyManager, where you can set the software to alert you if the measurement value changes. |
 |
|
Toggles the visibility of the measurement display. |